Internet Info 1993

home *** CD-ROM | disk | FTP | other *** search

/ Internet Info 1993 / Internet Info CD-ROM (Walnut Creek) (1993).iso / networking / terms / kermit / b / ikmker.lpt < prev next >

Wrap

Text File | 1993-06-25 | 138.9 KB | 2,266 lines

0 0 0 0 0 0 0 0 IBM SYSTEM/370 MUSIC KERMIT USER'S GUIDE 0 VERSION 4.2 0 John Chandler 0 Harvard/Smithsonian Center for Astrophysics 0 May 26, 1993 0 0 Copyright (C) 1981,1993 Trustees of Columbia University in the City of New York 0 Permission is granted to any individual or institution to use, copy, or redistribute this document so long as it is not sold for profit, and provided this copyright notice is retained. 1IBM System/370 Kermit Page i 0------------------------------------------------------------------------------- Table of Contents 01. IBM 370 KERMIT 1 0 1.1. Translation Tables 2 1.2. File Attributes 6 1.3. Program Operation 7 1.4. Kermit-370 Subcommands 9 1.5. Before Connecting to the Mainframe 31 1.6. Trouble-shooting Protocol Converters 32 1.7. After Returning from Kermit-370 35 1.8. What's New 36 1.9. What's Missing 37 1.10. Further Reading 38 02. IBM MUSIC/SP KERMIT 39 0 2.1. The MUSIC/SP File System 40 2.2. Program Operation 41 2.3. Kermit-MUSIC Subcommands 42 2.4. How to build an executable version of Kermit-MUSIC 45 2.5. What's New 46 2.6. What's Missing 46 0Index 48 1IBM System/370 Kermit Page ii 0------------------------------------------------------------------------------- List of Tables 0 Table 1-1: Allowed character set combinations in Kermit-370 4 Table 1-2: EBCDIC (hexadecimal) code points for LATIN1 5 Table 1-3: Character graphics for EBCDIC codes 7 Table 1-4: Error messages and codes for Kermit-370 36 11. IBM 370 KERMIT Page 1 0------------------------------------------------------------------------------- 1. IBM 370 KERMIT 0Program: John Chandler (Harvard/Smithsonian Center for Astrophysics); contributions from Vace Kundakci and Daphne Tzoar (Columbia U), Bob Shields (U. Maryland), Greg Small (UC Berkeley), Clark Frazier (Harvard Bus. Sch.), Bob Bolch and Steve Blankinship (Triangle), Ron Rusnak (U. Chicago), Roger Fajman and Dale Wright (NIH), Andre Pirard (U. Liege), Pierre Goyette (McGill U.) Language: IBM 370 Assembler Documentation: John Chandler (CfA) Version: 4.2.3 Date: 1993 May 0Kermit-370 is a family of programs implementing the KERMIT file transfer protocol for IBM 370-series mainframes (System/370, 303x, 43xx, 308x, 3090, etc.) under a variety of operating systems. Kermit-370 operates over asynchronous ASCII communication lines attached to a 3705-style or protocol en- veloping 3708 front end ("TTY" or line-mode devices), to a Series/1 or 4994 running the Yale ASCII Terminal Communication System or the IBM 7171 ASCII Device Control Unit or a 9370 with ASCII subsystem ("SERIES1" devices), to the IBM 3174 protocol converter at level B2.0 or higher ("AEA" devices), or to front-ends with graphics pass-through mode, such as the Datastream/Leedata 8010 and PCI 1076 ("GRAPHICS" devices). As of this writing, the pending implemen- tation of full(er) 7171 compatibility in the program product SIM3278 has not been completed. The non-line-mode devices are often called full-screen devices. For more details on front ends, see the section SET CONTROLLER. 0The source is coded in IBM 370 assembly language and is compatible with the F, VS, and H assemblers. The code is divided into sections, some generic and some specific to an individual operating system. While the details of file-system and supervisor interaction vary widely among the systems available for IBM 370's, the basic features are essentially the same. This chapter describes the features common to all variants of Kermit-370, and a separate chapter will deal with the system-specific details for each variant. 0IBM 370 systems have some peculiarities that users should be aware of. First, these systems are essentially half-duplex; the communication line must "turn around" before any data can be sent. The "TTY" devices are strictly half-duplex, and even the "SERIES1", "GRAPHICS", and "AEA" devices, although they maintain full-duplex communication with the terminal, must transmit a block at a time to the mainframe. The fact that a packet has been received from the IBM system through a "TTY" device is no guarantee that it is ready for a reply; generally, the true indicator of readiness is the line turnaround character (XON), which the operating system sends immediately before issuing a read request. On some systems, however, it is possible for Kermit to do away with the system-supplied turnaround and schedule read requests immediately after the corresponding writes. It is up to the user to tell the other Kermit how it must conform to the requirements of the IBM mainframe. 0A second distinction is that disk files are encoded using the EBCDIC character set. Consequently, there are three layers of character translation on packets exchanged on a "TTY" device. For an incoming packet, the outer layer is provided by the operating system, which translates all characters from ASCII to EBCDIC. Kermit-370 must then translate the packets back to ASCII (the middle layer) in order to calculate and verify the checksum. Data arriving through a 11. IBM 370 KERMIT Page 2 0------------------------------------------------------------------------------- "SERIES1", "GRAPHICS", or "AEA" device are still in ASCII and therefore bypass the two outer layers. In any case, Kermit-370 translates text files finally into EBCDIC (the inner layer) before storing on disk. When Kermit-370 sends a file, the opposite translations occur. The middle-layer tables used by Kermit must be the inverses of the corresponding outer-layer ones used by the host operating system if file transfers are to work at all. If necessary, the sys- tem programmer should add the appropriate SET TATOE/TETOA/TTABLE subcommands (q.v.) to the global INIT file. Indeed, it is usually a good idea to set TTABLE ON in the global INIT file to force using different built-in sets of tables for the inner and middle layers whenever the system has "TTY" devices. The standard 7-bit ASCII-to-EBCDIC translations can be found in the Appendix or the IBM System/370 Reference Card. See the section "Translation Tables" for more details. 0Another distinction of IBM 370's is that they store and retrieve files as records rather than byte streams. Records may be either fixed-length with some sort of padding (as needed) or varying-length with some sort of (generally hid- den) delimiters. Thus, Kermit-370 must assemble incoming data packets into records by stripping off carriage return-linefeed pairs (CRLF's) and padding with blanks or truncating as needed and must strip trailing blanks and append CRLF's to outgoing records. (See the SET FILE TYPE subcommand.) Further, disk files typically have the records combined into blocks for efficiency. One con- sequence of this form of storage is that files have attributes describing the component records: maximum record length (LRECL), record format (RECFM), and sometimes block size (BLKSIZE). 0As mentioned before, Kermit-370 is a family of programs. At present, only the CMS, TSO, MUSIC, ROSCOE, and CICS variants are operational. Variants for DOS-4 and MTS have at least reached the "drawing board," but no others have even been started as of this writing. Volunteers are always welcome to port Kermit-370 to other operating systems or add new features to the existing family. Anyone interested should first get in touch with the Center for Computing Activities at Columbia University to find out what projects of a similar nature are al- ready pending (and thereby prevent unnecessary duplication of effort). There are supplemental files in the Kermit distribution with explanations of how to go about porting Kermit-370 and how to add support for new terminal controller types. For details, refer to the installation guide for the variant of your choice. 0 1.1. Translation Tables 0Traditionally, IBM mainframe Kermits have translated 7-bit ASCII characters to 8-bit EBCDIC characters and ignored the "parity" bit in the process. Similarly, the 8-bit EBCDIC characters have been mapped onto 7-bit ASCII, thereby producing many ambiguities in translating the ASCII files back to EBCDIC. These ambiguities fall into two categories: EBCDIC characters not representable in ASCII have been rendered as ASCII nulls, and alternate EBCDIC representations of characters such as the ASCII backslash have been mapped together, but at least no two 7-bit ASCII characters are translated into the same EBCDIC character. The ambiguities were tolerable in environments where the traditionally non-printable characters never occurred in text files, but text processing has increasingly tended to include such characters for math- ematical formulas or for languages other than English. Ultimately, the trans- lation tables must become completely invertible, lest information be lost in the transfer. There has long been an option to replace parts of the trans- 11.1. Translation Tables Page 3 0------------------------------------------------------------------------------- lation tables via commands from the user (or imbedded in the INIT files), but such replacements were always supported locally and were, therefore, basically non-standard. 0The concept of standard translations is currently in a state of flux because of the proliferation of 8-bit code pages and the countervailing efforts at stan- dardization among groups such as the ISO and Kermit developers. In particular, Kermit-370 now supports a set of EBCDIC and "extended ASCII" code pages with built-in translation tables and automatic identification of the "ASCII" trans- fer character set via Attribute packets. This facility supports files stored using numerous IBM Country Extended Code Pages and permits transfers using character sets ASCII, CYRILLIC, GREEK, HEBREW, JAPAN-EUC, KATAKANA, LATIN1, LATIN2, LATIN3, and THAI. See Table 1-1 for a display of the allowed combina- tions of character sets. See also file ISOK7.TXT in the Kermit distribution for a somewhat outdated description of the protocol extensions. Kermit-370 currently supports text files in the following languages: Afrikaans, Albanian, Bulgarian, Byelorussian, Catalan, Czech, Croatian, Danish, Dutch, English, Esperanto, Faeroese, Finnish, French, Gaelic, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Italian, Japanese (Katakana and Kanji), Lao, Latin, Macedonian, Maltese, Norwegian, Polish, Portuguese, Quechua, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swahili, Swedish, Thai, Turkish, Ukrainian, and Volapuk. Visual representations of the characters sets may be found in the ISO register (for transfer) and in various IBM documents, such as S544-3156 "About Type" (for files). 0As nearly as possible, the tables in Kermit-370 are invertible, but all of the character sets reserve many (typically 65) code points for control characters and leave them officially undefined and unprintable. This applies both to IBM code pages and ISO standard 8-bit character sets. Although 33 of the controls have widely accepted mappings, the others do not, and Kermit-370 currently uses those given in an appendix of IBM's VS/Fortran Reference Manual. Needless to say, such translations are arbitrary and may be invalidated by future decisions at IBM or ISO. Still, most of the translations are likely to be stable in the long run. Table 1-2 shows the current translation from LATIN1 to EBCDIC, which is likely to be the most often used. Other translations, including the reverse ones, may be displayed using the TDUMP subcommand of Kermit-370. 0Besides converting files for transmission, Kermit-370 must also compensate for the EBCDIC/ASCII translation performed by some front ends and must, therefore, be able to apply the exact reverse translations on both input and output. This is the "middle layer" of translation described earlier for "TTY" devices. Con- sider the fate of a Left Square Bracket character in an inbound packet on a "TTY" line. It begins as ASCII code x'5B' (91 decimal), but the front end translates it to EBCDIC before presenting it to Kermit-370. In this example, suppose it becomes EBCDIC code x'4A' (74 decimal) instead of the standard x'AD' (173 decimal). Then, Kermit must be primed with a SET TETOA 74 91 so that, when reconstructing the original ASCII packet, the character becomes x'5B' again. Otherwise, the packet checksum will appear invalid. Kermit comes with a pair of default tables, but it may be necessary to customize them, as this example shows. The following procedure will reveal any changes needed. The procedure has two stages: the first is for any line-mode front end, and the second only for front ends capable of full 8-bit data transfer. Note that, al- though the discussion refers to hexadecimal values, the Kermit-370 SET subcom- mands require decimal numeric arguments. Also, note that this procedure as- sumes you will run Kermit with TTABLE set on; hence, the references to Kermit-370 tables are to TATOE and TETOA. If you choose to define Kermit's 11.1. Translation Tables Page 4 0------------------------------------------------------------------------------- ------------------------------------------------------------------------------- 0 Transfer character set 0 Local ASCII CYRILLIC GREEK HEBREW JAPAN KATAK. L1 L2 L3 THAI 0 CP037 * ** CP273 ** CP275 ** CP277 ** CP278 ** CP280 ** CP281 * ** CP282 ** CP284 ** CP285 ** CP290 * ** CP297 ** CP424 ** CP500 * * ** CP838 ** CP870 ** CP871 ** CP875 ** CP880 * ** CP905 ** CZECH * DKOI * *** EBCDIC ** *** H-EBCD * * KANJI * 0 Table 1-1: Allowed character set combinations in Kermit-370 0All allowed combinations are marked with asterisks, and the preferred combination in each row or column is the one with the most asterisks. Whenever a character set is specified, either directly or through an Attribute packet, the other category of character set is checked to see if it makes up an allowed combination. If not, it is forced to the preferred character set. 0 ------------------------------------------------------------------------------- 0file translation to match that of the front end, you should leave TTABLE set off and remove the T's from the SET subcommands described below. This will also turn off the automatic switching of translation tables according to the Attribute packets received from the other Kermit. Under CMS, you must issue a CMS SET INPUT and a CMS SET OUTPUT before starting this procedure. 0 1. Create a file containing all the non-control EBCDIC characters (hex codes 40-FF) and display the file on any available ASCII terminal hooked up to the line-mode front end in question. 0 2. If any printable ASCII character is missing from the display, Kermit cannot work through this front end (unless you modify the tables in 11.1. Translation Tables Page 5 0------------------------------------------------------------------------------- ------------------------------------------------------------------------------- 0 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -A -B -C -D -E -F 0 0- 00 01 02 03 37 2D 2E 2F 16 05 25 0B 0C 0D 0E 0F 1- 10 11 12 13 3C 3D 32 26 18 19 3F 27 1C 1D 1E 1F 2- 40 5A 7F 7B 5B 6C 50 7D 4D 5D 5C 4E 6B 60 4B 61 3- F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 7A 5E 4C 7E 6E 6F 4- 7C C1 C2 C3 C4 C5 C6 C7 C8 C9 D1 D2 D3 D4 D5 D6 5- D7 D8 D9 E2 E3 E4 E5 E6 E7 E8 E9 AD E0 BD 5F 6D 6- 79 81 82 83 84 85 86 87 88 89 91 92 93 94 95 96 7- 97 98 99 A2 A3 A4 A5 A6 A7 A8 A9 C0 4F D0 A1 07 8- 20 21 22 23 24 15 06 17 28 29 2A 2B 2C 09 0A 1B 9- 30 31 1A 33 34 35 36 08 38 39 3A 3B 04 14 3E FF A- 41 AA 4A B1 9F B2 6A B5 BB B4 9A 8A B0 CA AF BC B- 90 8F EA FA BE A0 B6 B3 9D DA 9B 8B B7 B8 B9 AB C- 64 65 62 66 63 67 9E 68 74 71 72 73 78 75 76 77 D- AC 69 ED EE EB EF EC BF 80 FD FE FB FC BA AE 59 E- 44 45 42 46 43 47 9C 48 54 51 52 53 58 55 56 57 F- 8C 49 CD CE CB CF CC E1 70 DD DE DB DC 8D 8E DF 0 Table 1-2: EBCDIC (hexadecimal) code points for LATIN1 0This table shows the values of the EBCDIC equivalents for the code points in the LATIN1 character set. The values are arranged in LATIN1 collating sequence, and the rows and columns are labeled with the first and second digits, respectively, of the LATIN1 code points. For example, LATIN1 code 41 (hex) is upper-case "A", and the intersection of row "4-" and column "-1" has the value C1 (hex), which is the EBCDIC code for "A". Rows "0-", "1-", "8-", and "9-" are officially undefined in ISO 8859-1 and so, in principle, could be changed at some future time, especially "8-" and "9-". Note that this table uses a format close to that of the TDUMP subcommand and of the Kermit code itself, but character-set tables are often displayed with the rows and columns interchanged. 0 ------------------------------------------------------------------------------- 0 the front end itself). 0 3. If any ASCII character appears twice, there is no cause for alarm. 0 4. If any ASCII character does not appear where it should, according to Table 1-3, a SET TATOE must be added to the system INIT file. For example, if EBCDIC code 5F (Not Sign, according to the Appendix) ap- pears as an ASCII Tilde (7E), but EBCDIC A1 (Tilde) does not, a SET TATOE 126 95 is required. Warning: characters considered unprint- able by the front end are likely to be filtered out entirely when you display the file; do not expect the display to line up just like Table 1-3. 0 5. Create a file on the mainframe using an ASCII terminal for input, and enter all 95 printable ASCII characters in collating sequence. You can presumably save time by skipping the 52 upper- and 11.1. Translation Tables Page 6 0------------------------------------------------------------------------------- lower-case letters and the 10 digits. 0 6. Display the file from the previous step in hexadecimal or other bi- nary form. 0 7. If any duplicates appear among the 95 characters (or 33, if you have taken the short cut), Kermit cannot work through this front end (un- less you modify the tables in the front end). 0 8. Compare the hexadecimal codes with rows 2-7 of Table 1-2. If a dis- crepancy appears, a SET TETOA must be added to the system INIT file. For example, if ASCII Left Bracket (5B) appears as EBCDIC 4A, a SET TETOA 74 91 is needed. At this point, the first stage is complete. 0 9. If 8-bit line-mode file transfer is desired, you must now verify the extended character set. Display the file of EBCDIC codes again, this time using a terminal with extended character set display, or capture the session with a micro Kermit and display the resulting file in hexadecimal. If any code in the range A0-FE does not ap- pear, the front end will not allow 8-bit Kermit data transfers. Generate SET TATOE entries for the entire range, as needed, just as in the example given for 7-bit codes. If the front end's trans- lation tables are documented, it may be easier to work from the manual, but you must be sure that you have tables for all of the translations that occur on the data path. 0 10. Create a file of the 95 extended ASCII codes A0-FE, if possible, by using a terminal capable of transmitting those codes or transmitting a pre-made file "raw". If necessary, use the appropriate table(s) in the manual(s) instead. 0 11. Again, if any duplicates appear, this front end is incapable of 8-bit file transfers. Otherwise, generate SET TETOA entries as be- fore. 0 1.2. File Attributes 0Kermit-370 attempts to send and receive file attributes along with the files themselves. Before Kermit receives a file, it compares the Length attribute (if available) with the amount of disk space available (if known) so that the file can be rejected if it will not fit. In addition, the Type, Access, Encod- ing, Disposition, and Format attributes, if any, are interpreted in order to match the received file to the original as nearly as possible. All other at- tributes (including Date) are simply ignored. For Type, Kermit recognizes text and binary specifications; for Access, it recognizes append, normal, and super- sede; for Encoding, it recognizes ASCII, extended, and EBCDIC (which it treats as binary); for Disposition, it recognizes mail, print, and job; and for For- mat, it recognizes text, D-binary, V-binary, binary, and LRECL. Any other values are rejected. 0On sending a file, if the other Kermit is willing to accept Attribute packets, Kermit-370 sends the Type, Encoding, Format, Date, and Length attributes (un- less some or all of them have been disabled -- see the SET ATTRIBUTE subcom- mand). 0Unfortunately, the set of file attributes defined in the Kermit protocol is not 11.2. File Attributes Page 7 0------------------------------------------------------------------------------- ------------------------------------------------------------------------------- 0 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 4- . < ( + | 5- & ! $ * ) ; ^ 6- - / , % _ > ? 7- ` : # @ ' = " 8- a b c d e f g h i 9- j k l m n o p q r A- ~ s t u v w x y z [ B- ] C- { A B C D E F G H I D- } J K L M N O P Q R E- \ S T U V W X Y Z F- 0 1 2 3 4 5 6 7 8 9 0 Table 1-3: Character graphics for EBCDIC codes 0This table shows the representations of the EBCDIC codes arranged in EBCDIC collating sequence, row by row. Codes that do not correspond to ISO 646 characters (7-bit ASCII), have been left blank. One special case is the EBCDIC code 5F, which represents a Not Sign in IBM's CP037, but which is traditionally mapped to the ASCII Circumflex, as shown here. WARNING: this manual may have been printed on a device that maps characters differently. Consult the Appendix to verify. 0 ------------------------------------------------------------------------------- 0well matched to the needs of IBM 370 file systems, so that much of the machinery for creating and interpreting of Attribute packets is useless. For example, the "Format" attribute, which should logically specify the record for- mat of the received file, gives only the format of the file in transmission and cannot distinguish between fixed-length and varying-length records for text files. This limitation is partly due to the fact that other Kermits do not generally support the same attributes. In short, even if the protocol made it possible, some of the important attributes would never be specified anyway. Nonetheless, efforts are being made to extend the protocol to be more com- prehensive. 0 1.3. Program Operation 0Kermit-370 can be invoked directly or from a command procedure. In either case, it reads and executes subcommands sequentially until directed to quit, and then returns. A subcommand consists of one or more fields (words) separated by spaces or commas. 0Upon startup, the program looks for two (optional) initialization files, one system-wide and a second specific to the user. Both filespecs are, of course, system-dependent. The purpose of these files is to allow Kermit to be cus- tomized for a particular system and for a user's specific settings without changing the source code. The system-wide file, which is maintained by a sys- 11.3. Program Operation Page 8 0------------------------------------------------------------------------------- tems programmer, should contain Kermit subcommands that all users would need to issue in order for Kermit to run on the system, such as subcommands to modify the ASCII/EBCDIC tables used by Kermit-370. The user-specific file, if any, should contain subcommands that the user generally issues every time Kermit is run. Kermit-370 executes any subcommands found in these files as though they were typed at the terminal. Here is a sample INIT file: 0 * Asterisk in column one is a comment. set transfer character-set latin1 set file collision rename set block 3 0During interactive execution, you may use the built-in help feature while typing Kermit-370 subcommands. A question mark ("?") typed at almost any point in a subcommand, followed by a carriage return, produces a brief description of what is expected or possible at that point. Moreover, mistyping a subcommand will generally produce a helpful error message or a list of possible options at the point of error. Keywords in such lists are displayed with the minimum-length abbreviation in upper case and the remainder, if any, in lower case. In entering Kermit subcommands, any keyword may be shortened to any sub- string that contains the minimum abbreviation. 0Besides knowing the mechanics of entering Kermit subcommands and interpreting responses, the user must understand which subcommands are necessary. The default values for Kermit-370 options have, in some cases, been constrained by a desire for continuity, so that some of the default behavior is distinctly "suboptimal." An example of this is the traditional 80-byte default RECEIVE packet size, which generally gives much slower transmission than a size of 1000 or more. Such options are flagged in this chapter with a notation that they perhaps ought to be set in the INIT files. Note, however, that the interplay of Kermit protocol sometimes provides a performance upgrade with no special ac- tion required from the Kermit-370 user. An example of this is the SEND packet-size, which is always under the control of the other Kermit. Kermit-370 always sends packets as long as the other Kermit allows, unless the frequency of transmission errors indicates that shorter packets would be more efficient (see the subcommand SET SPEED). 0Kermit-370 also attempts to produce optimal results by adapting to the file at- tributes sent by the other Kermit along with the files, such as TYPE and LRECL. Such attributes, when sent by the other Kermit, temporarily override the cur- rent settings in Kermit-370 during the reception of the associated file. Potentially even more importantly, Kermit-370 automatically recognizes the character set used for the file transfer and chooses, if necessary, a com- patible character set for file storage. Table 1-1 shows the currently sup- ported list of character sets. As with any automatic operation, Kermit's honoring of the transmitted attributes may need to be suppressed in part or al- together, and the SET ATTRIBUTE subcommand provides this capability. 0Another attribute that Kermit-370 supports is file disposition, which allows files to be received and immediately retransmitted as electronic mail, sent to a printer, or submitted as a batch job. These three options are highly site-specific and are implemented as a set of three host commands with similar calling sequences. In each case, the command is invoked in two different ways in the process of processing the file. It is called without any filespec or other options as soon as the corresponding attribute is recognized by Kermit-370. If the command is not implemented or for some reason returns a 11.3. Program Operation Page 9 0------------------------------------------------------------------------------- non-zero completion code (such a code should be negative, if at all possible), Kermit-370 rejects the file using the normal attribute exchange mechanism. Otherwise, the file is received as usual, and the command is invoked again at the end-of-file. The second time, the command is given the name of the received file and the options received from the sending Kermit (such as the list of recipients for electronic mail). The command is then responsible for disposing of the file (and deleting it, if desired). If, for any reason, the file cannot be sent as required, the command should return a negative comple- tion code (or non-zero, at any rate), and Kermit-370 will send back an error message to the sending Kermit. The command itself should refrain from issuing any messages of its own or permitting commands that it invokes to issue mes- sages. See the beginning of the chapter on the system-specific variant of Kermit-370 for the exact command syntax. Some sample implementations of such commands may be available in the Kermit distribution -- refer to the system-specific installation guide for a list of samples. 0 1.4. Kermit-370 Subcommands 0The following is a summary of Kermit subcommands. The starred subcommands can be issued as remote Kermit commands to Kermit-370 when it is in server mode. System-specific subcommands are omitted from this list. 0 BYE logs out other Kermit server. CWD* establishes a new working directory. DIRECTORY displays all or part of the disk directory. ECHO a line back to the user. EXIT from Kermit-370. FINISH other Kermit server. GET file(s) from a Kermit server. GIVE* creates a TAKE file snapshot of a table. HELP about Kermit-370. HOST* executes a system command. KERMIT* executes a Kermit subcommand. QUIT from Kermit-370. RECEIVE file(s) from other Kermit. SEND file(s) to other Kermit. SERVER mode of remote operation. SET* various parameters. SHOW* various parameters. SPACE* displays disk storage allocation. STATUS* inquiry. STOP easy escape from protocol mode. TAKE* subcommands from file. TDUMP* dumps the contents of a table. TYPE* a file. XECHO echoes a line (transparently). XTYPE displays a file (transparently). 0Although Kermit-370 is generally a remote Kermit, it has the capability of com- municating with another Kermit in server mode. In that situation, the subcommand prefixes REMOTE and LOCAL refer to the Kermit server and Kermit-370, respectively, even when Kermit-370 is, strictly speaking, the remote Kermit. To help avoid confusion, this chapter will often use the term "foreign" to apply to the Kermit at the other end from Kermit-370. All the above subcom- mands may be preceded by the LOCAL prefix, but only certain ones are valid with 11.4. Kermit-370 Subcommands Page 10 0------------------------------------------------------------------------------- REMOTE, including some not shown here. See the description of the SERVER sub- command for details. Any text replies Kermit-370 gets from the foreign Kermit server are added to a disk file (whose filespec is, of course, system-dependent). Such a transaction can be carried out, for example, under control of a TAKE file if Kermit-370 is not operating locally. If the local Kermit has a "magic" character sequence that switches it from terminal emula- tion to server mode, then an entire session could be controlled from the mainframe, possibly in response to a single command issued by a naive user. For example, 0 .grab 0 Kermit-370 is invoked and executes the following TAKE file 0 ECHO Serve Me! the local Kermit switches to server mode GET file.a the server uploads file.a FINISH the server switches back to terminal mode 0The remainder of this section describes subcommands with special meaning or use in Kermit-370, except the highly system-dependent ones. For the latter, refer to the appropriate chapter. Subcommands are listed in alphabetical order. 0 THE ECHO AND XECHO SUBCOMMANDS 0Syntax: [X]ECHO line 0These subcommands type the line back at the user. The line may contain control characters or any desired text, including upper or lower case. These subcom- mands may be used, for example, to test the ASCII/EBCDIC translate tables or to issue coded commands to the user's terminal. XECHO differs from ECHO primarily in that it sends the text as a raw transmission according to the current CON- TROLLER setting. Thus, XECHO will, if necessary, break the text into pieces no larger than the current SEND PACKET-SIZE and will use transparent mode if CON- TROLLER is SERIES1, GRAPHICS or AEA. It also offers its own brand of control-character quoting, using the "^" character to indicate that only the five low-order bits of the ASCII codes are to be used. Thus, "^a", "^A", and "^!" are all translated to SOH (CTRL-A), while "^[" becomes ESC. However, there must be one exception for "^" itself: "^>" and "^~" are both translated to RS (CTRL-^), but "^^" becomes just "^". XECHO also decodes 8th-bit quoting, just as in Kermit protocol, and this feature can be disabled by setting 8th-bit quoting off. For example, if the 8th-bit quote character is "&", entering the subcommand "XECHO &A" will transmit a code x'C1', but the same subcommand with quoting off will transmit two bytes: x'2641'. 0 THE GET SUBCOMMAND 0Syntax: GET [foreign-filespec [filespec]] 0The GET subcommand tells Kermit to request a file or file group from the other system, which must have a Kermit running in server mode. Provided the other Kermit complies, the effect is the same as if SEND foreign-filespec had been issued directly to the other Kermit and RECEIVE [filespec] to Kermit-370. If this subcommand is issued without any arguments, Kermit-370 will prompt the user for both foreign and native filespecs (and will insist on getting the 11.4. Kermit-370 Subcommands Page 11 0------------------------------------------------------------------------------- former, but will do without the latter). See the respective SEND and RECEIVE subcommands for a description of the each filespec. 0 THE GIVE SUBCOMMAND 0Syntax: GIVE table-name filespec 0This compares the named translation table with its current default values and saves the differences in the form of a TAKE file consisting of SET subcommands that would convert the default into the current arrangement. ATOE, ETOA, TATOE, and TETOA are the available tables. The details of the filespec are system-dependent, but those details will, in general, be the same as for the TAKE subcommand (q.v.). In the case of tables ATOE and ETOA, the current defaults are the values from the most recent character-set definition, if any, but the defaults for TATOE and TETOA always remain at the initial values. See the SET FILE CHARACTER-SET and SET TRANSFER CHARACTER-SET subcommands for more details. 0 THE HINTS SUBCOMMAND 0Syntax: HINTS 0This subcommand produces a screenful of suggestions for Kermit operation, in- cluding warnings about any current settings that may be undesirable. 0 THE HOST SUBCOMMAND 0Syntax: HOST text of command 0This issues a command to the host operating system from Kermit-370. When a command returns a non-zero completion code, the code will be displayed. Generally, the name of the system (e.g., CMS) is treated as a synonym for the HOST subcommand. 0When Kermit-370 is in (non-local) server mode, you must avoid sending it any HOST commands that trigger full-screen terminal I/O, since the server-client interface does not provide any full-screen terminal emulation, nor is Kermit-370 usually able to intercept such I/O in any case. 0 THE KERMIT SUBCOMMAND 0Syntax: KERMIT text of subcommand 0This is provided for redundancy as the counterpart of the HOST subcommand. Kermit-370 executes the specified text as a Kermit subcommand just as if the LOCAL prefix had been entered. Note, however, that the specified text must not begin with a second KERMIT prefix. 11.4. Kermit-370 Subcommands Page 12 0------------------------------------------------------------------------------- THE RECEIVE SUBCOMMAND 0Syntax: RECEIVE [filespec] 0The RECEIVE subcommand tells Kermit-370 to accept a file or file group. The user must issue the corresponding SEND subcommand to the other Kermit. When files are received, their names are recorded in a transaction log in memory and may be viewed later via the TDUMP NAMES subcommand. The log contains the names along with the file sizes and any relevant error messages. Another form of log may be provided through an accounting exit routine, which is called at the end of every RECEIVE session. Such an accounting log may contain elapsed time and numbers of bytes sent, received, and transferred to/from disk. If an error oc- curs during the file transfer, as much of the file as was received is saved on disk. If, however, the sending of a file is cancelled by the user of the foreign system, Kermit-370 will discard whatever had arrived, unless FILE COL- LISION is APPEND or INCOMPLETE is KEEP. 0Kermit-370 has a context-dependent maximum record length, and received records longer than that will be folded or truncated to the proper length; when this happens, Kermit may or may not stop, depending on the FILE subparameter LONGLINE. If truncation does occur, Kermit will later note the fact as an er- ror (unless something more serious happens in the meantime). In addition, when a fixed record length is specified, received records are padded to the correct length. The padding character is a blank for text files and a null for binary files. Received binary (but not V-binary or D-binary) files are treated as byte streams and broken up into records all of the logical record length, i.e., folded. For more details on the RECEIVE subcommand syntax and operation, see the chapter on the desired system-specific variant of Kermit-370 under both RECEIVE and SET FILE. See also (in this chapter) the SET FILE LONGLINE subcom- mand for details on record truncation and folding. 0 THE SEND SUBCOMMAND 0Syntax: SEND [filespec[<options>] [foreign-filespec]][, ...] 0The SEND subcommand tells Kermit-370 to send a file or file group to the other (foreign) Kermit. If no such file exists, Kermit-370 simply displays an error message and issues another prompt. Like RECEIVE, SEND keeps a transaction log of all files transferred in a group and calls the accounting exit routine at the end of the session. If this subcommand is issued without any arguments, Kermit-370 will prompt the user for both native and foreign filespecs (and will insist on getting the former, but will do without the latter). Either with or without prompting, SEND allows specifying a list of up to 13 files (or file groups) separated by commas. (By ending the command line or subsequent response with a comma, the user ensures further prompting.) In this syntax, the options enclosed in angle brackets may be regarded as part of the native filespec. There must be no intervening blanks. At present, the only supported option is a range of line numbers within the file to be sent. The range takes the form [n][-[m]], where n is the number of the first line to send (counting from 1), and m is the last. Omitting either number implies the corresponding limit is the physical beginning or end of the file. This same option syntax may be used in some commands issued to the foreign Kermit, namely, those in- volving filespecs in 370 form. In particular, GET and REMOTE TYPE can use this syntax. Note that a trailing ">" is used by some other Kermits, such as MS-Kermit, to indicate redirection of the output from REMOTE commands to disk. 11.4. Kermit-370 Subcommands Page 13 0------------------------------------------------------------------------------- In order to transmit the ">" and also prevent the redirection to disk, it would be necessary to add an explicit redirection to the terminal, as in 0 REM TYPE filespec<n-m> > CON 0Although file transfers cannot be cancelled from the 370 side, Kermit-370 is capable of responding to "cancel file" or "cancel batch" signals from the local Kermit; these are typically entered by typing CTRL-X or CTRL-Z, respectively. 0When Kermit-370 sends files using long packets (longer than 94), the throughput is especially sensitive to the level of noise on the line because retries are so time-consuming. Therefore, Kermit-370 imposes an extra, heuristic size limit on packets when retries have been found necessary. When that is the case, after every 15 packets, Kermit computes the packet size for maximum throughput assuming that the transmission errors were due to sparse, Poisson-distributed noise bursts. The result of this calculation is then used as another limit on the size of outgoing packets besides the one specified by the other Kermit. If no retries are required, then Kermit-370 assumes the line to be noiseless and sends packets of the maximum length the other Kermit al- lows. The algorithm is explained in Kermit News V. 3 #1. For more details on the SEND subcommand syntax and operation, see the chapter on the desired system-specific variant of Kermit-370. 0 THE SERVER SUBCOMMAND 0Kermit-370 is capable of acting as a server. In server mode, Kermit-370 can send and receive files, execute host commands, execute a restricted set of Ker- mit subcommands, and perform a variety of generic Kermit functions. The fol- lowing list shows the typical local Kermit commands along with the server func- tions they elicit. When Kermit-370 is talking to another Kermit running in server mode, these same subcommands may be used in the other direction. 0BYE log out the Kermit server. FINISH server mode. GET a file or files from the server. REMOTE COPY a file or files. CWD set new working directory. DELETE a file or files. DIRECTORY display file attributes. HELP display a command summary, such as this. HOST execute a system command. KERMIT execute a Kermit-370 subcommand. PRINT send a file to be printed by the server. RENAME a file or files. SPACE display disk space. TYPE a file. SEND a file or files to the server. 0If your local Kermit does not support the REMOTE KERMIT command, you may need to issue SET subcommands to select various options before typing the SERVER subcommand. Once in server mode, Kermit-370 will await all further instruc- tions from the client Kermit on the other end of the connection until a FINISH or BYE command is given. 0Command execution in server mode is different in some respects from normal 11.4. Kermit-370 Subcommands Page 14 0------------------------------------------------------------------------------- operation. First of all, some Kermit subcommands are not allowed (see the list at the beginning of this section). Moreover, command errors always terminate any active TAKE file. Also, all commands will be run in the special environ- ment that Kermit sets up during protocol transfers. Among other things, Kermit intercepts all terminal I/O (if possible) in this environment in order to transmit the data to the local Kermit as text packets. 0Note that some operations can be requested by several different commands. If for example, the IBM 370 system has a command "PRT" for displaying a file, a user interacting with a Kermit-370 server can choose to display a file by is- suing any of the commands: REMOTE TYPE, REMOTE HOST PRT, REMOTE KERMIT TYPE, REMOTE KERMIT HOST PRT, or (if SYSCMD has been set ON) REMOTE KERMIT PRT. The first form simply transfers the requested file as text, but the others invoke the "PRT" command with any specified options, intercept the terminal output, and return the results to the local Kermit. The first form is also distin- guished by the fact that the line range may be specified in the same manner as in the SEND subcommand. The syntax of the others is system-dependent. 0 THE SET SUBCOMMAND 0Syntax: SET parameter [value] 0The SET subcommand establishes or modifies various parameters controlling file transfers. The values can, in turn, be examined with the SHOW subcommand. Some parameters have two levels. In particular, there are two matching lists of SEND and RECEIVE sub-parameters corresponding to the values exchanged by Kermits in the Send-Init/ACK sequence. For each of these SEND/RECEIVE pairs one element is encoded in outgoing parameter packets, and the other is decoded from incoming ones. Setting the latter by hand may be needed to establish con- tact and also has the effect of redefining the default value for decoding from subsequent parameter packets. Generally, the distinction between SEND and RECEIVE parameters is unambiguous, the only exception being TIMEOUT (q.v.). The following SET subcommands are available in Kermit-370: 0ATOE Modify the Kermit-370 ASCII-to-EBCDIC table. ATTRIBUTE Determine A-packet generation. BLOCK-CHECK Level of error checking for file transfer. CONTROLLER Indicate type of terminal connection. DEBUG Log packet traffic during file transfer. DELAY Length of pause before a SEND subcommand. EOF Text file truncation at CTRL-Z. ETOA Modify the Kermit-370 EBCDIC-to-ASCII table. FILE Attributes for incoming or outgoing files... CHARACTER-SET ... for 370 storage. COLLISION ... treatment for duplicate names. LONGLINE ... treatment of too-long records. OVERWRITE ... treatment of attributes. TYPE ... text or binary. other ... system-specific attributes. FOREIGN Strings added to outgoing filespec... PREFIX SUFFIX INCOMPLETE Determine the action on an aborted file transfer. LINE Specify alternate communication line. MARGIN for sending files... 11.4. Kermit-370 Subcommands Page 15 0------------------------------------------------------------------------------- LEFT RIGHT PROMPT For Kermit-370 subcommands. RETRY Maximum retry count... INIT ... for initial packet exchange. PACKET ... per packet for ongoing transfer. SERVER-TIMEOUT Spacing between server NAK's. SPEED Line speed for packet-size calculations. SYSCMD Try apparently invalid Kermit subcommands on host system. TABS-EXPAND Determine tab-to-space conversion on reception. TAKE ECHO Echo subcommands read from TAKE files. ERROR-ACTION Exit from TAKE file on command error. TEST Facilitate testing of Kermit. TATOE Modify the Kermit-370 ASCII-to-EBCDIC table. TETOA Modify the Kermit-370 EBCDIC-to-ASCII table. TRANSFER Options... CHARACTER-SET ... for transmission. TTABLE Determine which tables undo the terminal translation. 8-BIT-QUOTE Determine state of 8th-bit prefixing. SEND or RECEIVE END-OF-LINE Packet terminator. PACKET-SIZE Maximum packet size. PAD-CHAR Character to insert before each packet. PADDING Number of pad characters to insert. PARITY Indicate if 7-bit or 8-bit data. QUOTE Use to quote control characters in packets. START-OF-PACKET Packet beginning marker. TIMEOUT Time limit for response. 0 SET ATOE etc. 0Syntax: SET table [num1 num2] 0This modifies one of the ASCII/EBCDIC translation tables used by Kermit-370 (for example, to conform to your system). The valid table names are ATOE, ETOA, TATOE, and TETOA. The arguments are, respectively, the offset within the named table and the new value for that offset. If the arguments are omitted, the table is restored to its initial arrangement. Both num1 and num2 should be in the range 0-255 (decimal). For example, in ATOE or TATOE, the offset is the ASCII character code, and the new value is the new EBCDIC result code. In- itially, ATOE and TATOE each contain two identical copies of the 7-bit ASCII character table. Helpful hint: if you have files that make use of extended (8-bit) ASCII codes and wish to upload them via Kermit-370, be sure to define unique EBCDIC equivalents of all the needed 8-bit ASCII codes or else treat such files as binary data. Any time you use the SET ATOE or SET ETOA subcom- mands, that has a side effect equivalent to SET ATTRIBUTE ENCODING OFF (q.v.). If the extended ASCII character set is one of those supported for file transfer in Kermit-370, you need only issue a SET TRANSFER CHARACTER-SET (q.v.). 0Note: the meaning of the tables depends on the TTABLE setting -- if TTABLE is OFF, the TATOE and TETOA tables are not used. 11.4. Kermit-370 Subcommands Page 16 0------------------------------------------------------------------------------- SET ATTRIBUTE 0Syntax: SET ATTRIBUTE [attribute] ON or OFF 0The individual attributes are LENGTH, TYPE, DATE, CREATOR, ACCOUNT, AREA, PASSWORD, BLOCKSIZE, ACCESS, ENCODING, DISPOSITION, PROTECT, ORIGIN, FORMAT, SYS-INFO, and BYTE-LENGTH. Kermit-370 distinguishes between the two forms of this subcommand by counting "words". In order to see the list of supported at- tributes, you must enter "SET ATTR ? ?"; if you enter just "SET ATTR ?", Kermit will list just the alternatives ON and OFF. 0ON The specified attribute is to be processed, or attribute packets are generated for all outgoing files, provided the other Kermit indicates the ability to accept them. (Default). 0OFF The specified attribute is to be ignored and not generated, or at- tribute packets are never generated. 0 SET BLOCK-CHECK 0Syntax: SET BLOCK-CHECK number 0This determines the type of block check used during file transfer, provided the other Kermit agrees. Valid options for number are: 1 (for a one-character checksum), 2 (for a two-character checksum) and 3 (for a three-character CRC). This is one of only two Send-Init parameters that cannot be SET separately for SEND and RECEIVE. 0 SET CONTROLLER 0Syntax: SET CONTROLLER type 0The type may be TTY, SERIES1, GRAPHICS, AEA, FULLSCREEN, VTAMTTY, or NONE. Kermit-370 automatically determines whether you are connected via a Series/1 (or similar) emulation controller or a TTY line. In some circumstances, such as when the connection is through a non-graphics-capable 3174 port, Kermit will set CONTROLLER to NONE, which has the effect of disabling file transfers. This subcommand is provided, though, to allow the automatic choice to be superseded, and because Kermit may not be able to distinguish between Series/1-type and other 3270-emulation controllers. In particular, there is no way to distin- guish between FULLSCREEN and GRAPHICS from within Kermit. When CONTROLLER is set to SERIES1, GRAPHICS, or AEA, Kermit disables the 3270 protocol conversion function by putting the terminal controller into "transparent mode", which al- lows Kermit packets to pass through intact. Note: an incorrect CONTROLLER set- ting may lock up or wipe out your session when you try to transfer files. 0Kermit operation is possible through an IBM 3708 front end, but only in a rather specific configuration. See the installation guide for your variant of Kermit-370 for the details of that and other hardware-related restrictions and configurations. 11.4. Kermit-370 Subcommands Page 17 0------------------------------------------------------------------------------- SET DEBUG 0Syntax: SET DEBUG OFF or ON [RAW] [I/O] [SAVE] [LONG] 0Note: any combination, in any order, of RAW, I/O, and SAVE may follow or replace ON. Each of the three implies ON. 0ON Keep a journal of all packets sent and received in a log file on disk. If the file already exists, it is erased and overwritten. The filespec of the log is, of course, system-dependent. All packets are logged in EBCDIC for legibility, even when CONTROLLER is set to SERIES1, GRAPHICS, or AEA. 0RAW The same as ON, but packets are logged in the form that is passed to or from the operating system, i.e., EBCDIC for TTY or VTAMTTY terminals, and ASCII for SERIES1, GRAPHICS, and AEA terminals. 0I/O The same as ON, but the log includes additional transmission status in- formation, such as the AID returned by a full-screen device. See below for a summary of the log formats. 0SAVE The same as ON, but the log file is closed after each entry is added, so that, if the session is abnormally terminated, the log file will be complete and readable. 0LONG The same as I/O, but the additional information is not truncated to 36 bytes. 0OFF Stop logging packets and close the the log file. (Default.) 0Often, problems with Kermit file transfers or server-mode operations can be diagnosed by setting DEBUG on in one or both Kermits, regardless of where the problems actually lie. For Kermit-370, the maximum amount of information can generally be obtained by setting DEBUG to I/O or LONG, but the format of the log depends somewhat on which variant of Kermit-370 is involved. Before ex- amining the log, you should set DEBUG OFF either explicitly or by exiting from Kermit-370. 0There is an optional feature for logging dumps of storage blocks at selected points in the execution. By default, this feature is disabled (at assembly time) by having the variable symbol &KTRACE set to NO and also by virtue of the fact that no calls to the dump routine are present in the distribution code. Further, the dumps are suppressed unless both DEBUG and TEST (q.v.) are set on. To select when and what blocks to dump, it is necessary to insert calls to KHDMP at appropriate points in the source before assembling. Each such call generates a dump each time it is executed, provided that DEBUG and TEST are set, and the contents of all registers are preserved. The call specifies the starting address, the length, and a short title for the block. Only eight characters of the title will be used. Some examples: 0 KHDMP ATOE+128,128,'ATOEhigh' Dump the 2nd half of the ATOE table. 0 KHDMP KHDSAV,20,'R14 - R2' Dump registers 14-2. 0 KHDMP 32(,13),40,'**R3-R12' 11.4. Kermit-370 Subcommands Page 18 0------------------------------------------------------------------------------- Dump registers 3-12. 0 KHDMP (3),(0),'**QBLOCK' Dump block addressed by R3 with length specified in R0. 0There is another debugging facility that is enabled by the variable symbol &KTRACE along with the dump option, namely, an execution trace. There is a circular buffer of trace elements in Kermit's working storage, and a new ele- ment is written each time a Kermit subroutine is called or returns. The ele- ments contain the subroutine name plus (on entry) a sequence number and the contents of registers 0 and 1 or (on exit) the character ">" and the contents of registers 15 and 1. There is also a mechanism for tracing extra events by inserting KTRACE calls into the source. For example, 0 KTRACE 0(5),REGS=5 Trace eight bytes pointed to by R5 and R5 itself. 0 KTRACE FOOBAR Trace eight bytes at label FOOBAR. 0 KTRACE 'Found it',REGS=(1,7) Trace 'Found it', R1, and R7. 0The trace table is simply updated in storage, eating its own tail. It can be found in a memory dump by locating the "eye-catcher" that says "KTRACE:", which precedes the start, current, and end pointers for the table. Usually, there is no access to the table except in ABEND dumps and the like. It would not be very useful to have a KHDMP call for the table, since each line dumped to the debug log would cause at least four other lines in the table to be overwritten by the ongoing trace, thereby losing most of the desired information. 0Each line in the debug log begins with a one-letter tag and a colon and con- tains information according to the tag. The following tags are defined. 0S: The text of a packet sent. Normally, it will be encoded in EBCDIC for con- venience, but if DEBUG is set to RAW, the packet will appear exactly as passed to or from the system, i.e., in EBCDIC for TTY or VTAMTTY lines and in ASCII for full-screen lines. 0R: The text of a packet received. The same encoding applies. 0A: The AID and buffer address returned by a full-screen device along with a read operation (three characters in all). The values should all be print- able EBCDIC. This obsolete tag was used by TSO and MUSIC Kermits and ap- peared only when DEBUG was set to I/O. 0*: Data dumped by the optional KHDMP routine. 0The following tags appear only when DEBUG is set to I/O or LONG. All values are in hexadecimal. The meanings differ slightly according to the operating system. For CMS, the I/O parameter list is a channel command; for TSO or ROS- COE, the SVC 93 (TPUT/TGET) parameters; for CICS, an intermediate string similar to channel commands. Similarly, the status data consist of the stored CSW plus an attention interrupt indicator for CMS, but the return code from the I/O operation for TSO, ROSCOE, CICS, and MUSIC. 11.4. Kermit-370 Subcommands Page 19 0------------------------------------------------------------------------------- a: Channel and device status after an unexpected attention interrupt. 0b: I/O parameter list for recovering from a CP break-in on screen. 0c: I/O parameter list for resuming normal screen operation. 0d: Data transferred on the previously indicated I/O operation. 0e: Status data after an I/O command has completed with an error. 0g: I/O parameter list for reading from the screen buffer. 0i: Status data after an I/O command has completed normally. 0m: I/O parameter list for displaying text on the screen. 0o: I/O parameter list for initializing the screen for transfers. 0r: I/O parameter list for reading from the terminal. 0w: I/O parameter list for a transparent write. 0?: I/O parameter list for some other operation, such as clearing the screen. 0 SET DELAY 0Syntax: SET DELAY number 0Normally, Kermit-370 waits 10 seconds after the SEND subcommand before starting the transfer, but this delay may be set to any non-negative value. Two DELAY values have special meaning. When DELAY is 1, the usual two-line greeting dis- played during protocol mode is abbreviated to a short message (the default Ker- mit prompt with three dots...), and when DELAY is 0, the greeting is suppressed entirely, along with the extra one-second pause for subcommands like RECEIVE, SERVER, REMOTE, and the like. 0 SET EOF 0Syntax: SET EOF ON or OFF 0ON Scan each incoming TEXT file for the first occurrence of CTRL-Z and ig- nore the remainder of the file (but continue decoding up to the actual end of the file). BINARY files are not affected. 0OFF Accept incoming files in their entirety. (Default.) 0 SET FILE CHARACTER-SET 0Syntax: SET FILE CHARACTER-SET name 0Specifies the name of the character set used in files stored on disk. This setting may be superseded by an Attribute packet of an incoming file. Cur- rently, the available names are CP037, CP273, CP275, CP277, CP278, CP280, 11.4. Kermit-370 Subcommands Page 20 0------------------------------------------------------------------------------- CP281, CP282, CP284, CP285, CP290, CP297, CP424, CP500, CP838, CP870, CP871, CP875, CP880, CP905, CZECH, DKOI, EBCDIC, H-EBCDIK-DASH, and KANJI (or FUJITSU-KANJI, HITACHI-KANJI, or IBM-KANJI). The names beginning with CP refer to IBM code pages, while DKOI is the Cyrillic standard GOST 19768-87 used in the USSR, CZECH is a character set sometimes used in Czechoslovakia, and EBCDIC (the default) is the traditional de facto standard EBCDIC character set. A character set other than the default may be required by local conventions and, if so, should be specified in the system or user INIT files. See Table 1-1 for the allowed combinations of transfer and file character sets. Explicitly set- ting this option has a side effect equivalent to issuing SET ATTRIBUTE ENCODING ON (q.v.). 0The name KANJI is actually just an alias for the local preferred proprietary Kanji code (Fujitsu, Hitachi, or IBM). The various Kanji character sets have two-byte codes (DBCS), but are used with one-byte code pages (SBCS) as well. It is normally necessary to issue two SET FILE CHARACTER-SET SUBCOMMANDS in or- der to set up for a DBCS: first, selecting a compatible SBCS, and, second, selecting the DBCS itself. If the current SBCS is incompatible with the selected DBCS, a default will be chosen. This default, along with the choice of the particular proprietary character set associated with the alias KANJI, is chosen by the installer. 0 SET FILE COLLISION 0Syntax: SET FILE COLLISION action 0Specifies the action to take when an incoming file has the same name as an ex- isting one. Two of the options involve choosing an alternative, unique name similar to the one in conflict, but the details of choosing are system-specific. Typically, the method involves adding digits to the existing name. 0APPEND The new file is appended to the old one. This option has the the same effect as the old subcommand SET APPEND ON. 0BACKUP The existing file is renamed, and the new file is given the desired name as if no conflict had occurred. 0DISCARD The incoming file is rejected by returning a "cancel file" indica- tion on any Data packets. 0OVERWRITE The existing file is overwritten with the incoming file. This is the default for the CMS, TSO, ROSCOE, and MUSIC variants. Chang- ing this default is a good candidate for INIT files. When COL- LISION is set to OVERWRITE, the attributes of the new file are determined by the current setting of FILE OVERWRITE (q.v.). 0RENAME The incoming file is renamed so as not to destroy (overwrite) the pre-existing one, and the new name is returned to the sending Ker- mit for information purposes. This has the same effect as the old subcommand SET WARNING ON. This is the default for the CICS variant. 11.4. Kermit-370 Subcommands Page 21 0------------------------------------------------------------------------------- SET FILE LONGLINE 0Syntax: SET FILE LONGLINE FOLD or TRUNCATE or HALT 0This specifies the action to take when a received line is longer than the cur- rent maximum record length. That length is determined by the context in a system-specific way. Refer to the description of the RECEIVE subcommand in the appropriate chapter for details. 0FOLD Specifies that long lines are to be split into two or more records as needed, all but the last being of the maximum length. No null records are created when the received line is an exact multiple of the record length. BINARY files are, by definition, always con- sidered as a single line and, therefore, are always folded, regard- less of the setting of this parameter. V-BINARY and D-BINARY files, on the other hand, are reconstructed by folding at points determined by the context within the received file, and cannot be folded fur- ther to fit the current maximum length. Any such records that are too long will be truncated. 0TRUNCATE Specifies that long lines are to be truncated at the maximum length. (Default.) Kermit-370 takes note of the number of such truncations performed on a file and reports it in the STATUS message and also treats the fact of truncation as an error when the file transfer is complete. The file will have been transferred, but obviously not quite intact. However, this option can be useful for some tasks, such as stripping sequence numbers from card images. The process is similar to that provided by the SET MARGIN RIGHT subcommand for sending files. 0HALT Specifies that a file transfer is to halt immediately if a received line is too long. Kermit-370 then issues an error packet and stops the transfer. 0 SET FILE OVERWRITE 0Syntax: SET FILE OVERWRITE DEFAULT or PRESERVE 0DEFAULT Specifies that the current file attribute settings are to be used for the new file. The result is roughly the same as if the old file, if any, were completely erased before the new file is received. (Default.) 0PRESERVE Specifies that the attributes of the file being overwritten are to be retained and used for the new file. The result is roughly the same as if the old files contents were deleted, and the new file were appended to the empty stub. 0 SET FILE TYPE 0Syntax: SET FILE TYPE type 0Specifies the type of data comprising files to be sent or received. This set- ting may be temporarily superseded by the Attribute packets for a file being 11.4. Kermit-370 Subcommands Page 22 0------------------------------------------------------------------------------- received. 0TEXT Specifies ordinary text. ASCII-to-EBCDIC or EBCDIC-to-ASCII trans- lation is performed on the data. Trailing blanks are removed, and CRLF's are appended to outgoing records. CRLF's are used, in turn, to determine the end of incoming records, which are padded with blanks if necessary to fill buffers. (Default.) Note: trailing blanks are removed from outgoing, varying-length records only if they consist of a single blank each, or if there is a right margin specified (q.v.). Further note: a given file is intrinsically categorized as fixed-length or varying-length (or undefined-length) by the file system and cannot be changed simply by setting the FILE RECFM parameter in Kermit. Conversion between formats is a system-specific function; see the system documentation or consult your local support staff for details on conversion techniques. 0BINARY Specifies bit-stream data. No translation is performed, no CRLF's are added to outgoing records, and blanks are neither added nor removed. Incoming bytes are added successively to the current record buffer, which is written out when the current LRECL is reached. Padding, if necessary, is done with nulls. 0V-BINARY Specifies varying-length-record binary data. This type is like BI- NARY, except that a two-byte binary prefix is added to each outgoing record giving the number of data bytes, and incoming records are set off by (and stripped of) their prefixes on receipt. 0D-BINARY Is like V-BINARY except that the length prefixes are five-byte ASCII-encoded decimal (right-justified with leading zeroes). 0 SET FOREIGN 0Syntax: SET FOREIGN PREFIX string 0This defines a prefix string to be added to the outgoing filespec generated by the SEND subcommand. For example, the string might be set to "B:" to specify output to the B disk drive on the other Kermit's system. The default is a null string. There is also a FOREIGN SUFFIX handled in the same manner. 0 SET HANDSHAKE 0Syntax: SET HANDSHAKE number 0This defines the character, if any, that Kermit-370 should send (or cause to be sent) immediately before reading each packet. The character is given as the decimal of an ASCII control character, or as zero if no handshake is to be sent. The default is 17 (XON), and any value in the range 0-31 is valid, but 13 (CR) should not be used because it is generally the end-of-packet character. When Kermit-370 is running through a full-duplex connection (such as a "SERIES1"), the traditional IBM handshaking is not necessary, and HANDSHAKE should be set to 0 (as long as the other Kermit can be instructed not to expect a handshake). Note the distinction between SET HANDSHAKE in Kermit-370 (where it defines a character to be sent) and in many micro Kermits (where it defines a character to be expected). 11.4. Kermit-370 Subcommands Page 23 0------------------------------------------------------------------------------- SET INCOMPLETE 0Syntax: SET INCOMPLETE DISCARD or KEEP 0DISCARD Specifies that incomplete files (that is, files partially received in a transfer cancelled by the other Kermit) are to be erased. This is the default. Note that when FILE COLLISION is APPEND, incomplete files are never erased, lest pre-existing data be lost. 0KEEP Specifies that incomplete files are to be kept. 0 SET LINE 0Syntax: SET LINE [name] 0This specifies an alternate communication line for file transfers. If the name is omitted, the default line (the user's terminal) is used. The format of name is, of course, system-dependent, and some variants of Kermit-370 do not support any alternate lines. No variant currently allows Kermit-370 to CONNECT over an alternate line. 0 SET MARGIN 0Syntax: SET MARGIN side column 0When Kermit-370 sends a text file, each line may be truncated on the left or right (or both) at fixed column numbers. Only the text from the left margin to the right margin (inclusive) will be sent, and any trailing blanks in the trun- cated lines will be stripped. A value of zero for either margin disables trun- cation on that side. 0 SET PROMPT 0Syntax: SET PROMPT [string] 0This defines the character string that Kermit-370 displays when asking for a subcommand. The prompt may be any string of up to 20 characters. The default is the name of the system-specific variant of Kermit-370 followed by a ">" sign, e.g., Kermit-CMS>. If the string is omitted, normal system prompting will occur. 0 SET RETRY 0Syntax: SET RETRY INITIAL or PACKETS number 0Kermit-370 resends its last packet after receiving a NAK or bad packet, but it eventually gives up after repeated failures on the same packet. The limit on retries can be set separately for the initial packet exchange (Send-Init or server-mode command) and for ordinary packets. The default for INITIAL is 16 and for PACKETS, 5. Either limit can be set to any positive value. 11.4. Kermit-370 Subcommands Page 24 0------------------------------------------------------------------------------- SET SERVER-TIMEOUT 0Syntax: SET SERVER-TIMEOUT time 0This defines the time in seconds that Kermit-370 in server mode should wait for a command before sending a NAK packet. The default is 120. A value of 0 means that Kermit should wait indefinitely, not only in the server loop, but in all transfers, regardless of the timeout value specified by the other Kermit. Some variants are unable to time out in any case. Also, timeouts are not im- plemented for any of the full-screen terminal controllers. 0 SET SPEED 0Syntax: SET SPEED number 0This determines the communication line speed assumed by Kermit-370 in calculat- ing the optimum packet size. If the value is zero, such calculations are sup- pressed. This option is purely informative and has no effect on actual line speed. (Default 1200.) 0 SET SYSCMD 0Syntax: SET SYSCMD ON or OFF 0ON If the user enters a command string which is not a valid Kermit subcom- mand, Kermit-370 will pass the string along to the host operating sys- tem for execution. If the string is rejected by the system as well, Kermit will report it as an invalid Kermit subcommand. Otherwise, Ker- mit will assume the string was intended as a host command and will simply report the completion code if non-zero. 0OFF Invalid Kermit subcommands are simply rejected as such. System com- mands may be executed, of course, but only by specifying the generic prefix "HOST" or the appropriate system-specific prefix, such as CMS or TSO. (Default.) 0 SET TABS-EXPAND 0Syntax: SET TABS-EXPAND ON [list] or OFF 0ON Tab characters in incoming TEXT files are replaced by one or more blanks to bring the record size up to the next higher multiple of eight for each tab. If tab settings other than columns 1, 9, 17, etc. are desired, they may be specified explicitly in a list following the keyword "ON". Items in the list may be separated by spaces or commas and must be in strictly increasing order. 0OFF Incoming tabs are retained. (Default.) 11.4. Kermit-370 Subcommands Page 25 0------------------------------------------------------------------------------- SET TAKE ECHO 0Syntax: SET TAKE ECHO ON or OFF 0ON Subcommands are echoed to the terminal as they are executed from a TAKE file. 0OFF Subcommands from a TAKE file are executed "silently." (Default.) 0 SET TAKE ERROR-ACTION 0Syntax: SET TAKE ERROR-ACTION CONTINUE or HALT 0CONTINUE Execution continues in a TAKE file regardless of illegal commands, except in server mode. (This is the default.) 0HALT A command error in a TAKE file causes immediate exit to Kermit sub- command level. 0 SET TEST 0Syntax: SET TEST ON or OFF 0ON Allow setting the START-OF-PACKET and other special characters to any value, and suppress type 1 checksum testing on received packets. 0OFF Normal operation. (Default.) 0 SET TRANSFER CHARACTER-SET 0Syntax: SET TRANSFER CHARACTER-SET name 0Specifies the name of the character set used in sending or receiving files. This setting may be superseded by an Attribute packet of an incoming file. Currently, the available names are ASCII (the default), CYRILLIC, GREEK, HEBREW, JAPAN-EUC, KATAKANA, LATIN1, LATIN2, LATIN3, THAI, and TRANSPARENT. There are also special aliases L1, L2, and L3 for the LATINx names. All but JAPAN-EUC, TRANSPARENT, and ASCII represent 8-bit codes composed of a pair of 94- or 96-character sets from the ISO registry combined with normal definitions for the so-called C0 and C1 characters. JAPAN-EUC is a DBCS for encoding Kanji characters, plus Roman, Greek, and Cyrillic. ASCII is the traditional charac- ter set supported by Kermit, but one of the newer, 8-bit sets would be preferable for most users. This option is, therefore, a good candidate for inclusion in the system INIT file. See Table 1-1 for the allowed combinations of transfer and file character sets. Explicitly setting this option has a side effect equivalent to issuing SET ATTRIBUTE ENCODING ON (q.v.). There is one exception, namely, TRANSPARENT, which sets ENCODING OFF and replaces both translation tables with null operations, regardless of the current nominal file character set. 0The biggest drawback of the built-in tables for the various character sets is that neither the ISO registry nor IBM defines any mapping between the C1 characters (hex 80-9F in ISO arrangements) and the characters of EBCDIC code 11.4. Kermit-370 Subcommands Page 26 0------------------------------------------------------------------------------- pages. Thus, the mappings in Kermit-370 tables are somewhat arbitrary, and fu- ture pronouncements may suddenly invalidate some or all of those 32 mappings. 0 SET TRANSFER LOCKING-SHIFT 0Syntax: SET TRANSFER LOCKING-SHIFT ON or OFF or FORCED 0ON The Kermit locking-shift protocol is to be used in transfers to or from cooperating partners, provided that 8th-bit quoting is enabled. 0OFF The Kermit locking-shift protocol is not to be used. 0FORCED The Kermit locking-shift protocol is to be used, regardless of the cooperation of the other Kermit. The encoding uses only the locking shifts, to the exclusion of 8th-bit quoting. 0 SET TTABLE 0Syntax: SET TTABLE ON or OFF or KP 0ON The translation that undoes the terminal controller's ASCII/EBCDIC con- version comes from the TATOE and TETOA tables, rather than the ATOE and ETOA tables (which are used only for translating disk files). This op- tion has no effect when there is no translation built into the con- troller, i.e., with SERIES1, GRAPHICS, and AEA connections. 0OFF The ATOE and ETOA tables are used for all translations by Kermit-370. (Default.) 0KP Same as ON, but also establishes values in the TATOE and TETOA tables based on IBM's corporate standard ASCII/EBCDIC translation (distinct from the internationally accepted de facto standard). 0 SET 8-BIT-QUOTE 0Syntax: SET 8-BIT-QUOTE char or ON or OFF 0This controls whether eighth-bit prefixing is done and can be used to specify the character to be used. This is one of only two Send-Init parameters that cannot be SET separately for SEND and RECEIVE. 0char Eighth-bit prefixing will be done using char, provided the other Kermit agrees. The default value is an ampersand. 0ON Eighth-bit prefixing will be done, provided the other Kermit explicitly requests it (and specifies the character). 0OFF Eighth-bit prefixing will not be done. 11.4. Kermit-370 Subcommands Page 27 0------------------------------------------------------------------------------- SET SEND/RECEIVE 0The following parameters can be set either as SEND or RECEIVE options. As a rule, in each pair, one is the operational value, and the other is used to change the default for Send-Init packets received from the other Kermit and to set up parameter values as if the other Kermit had specified them on the pre- vious exchange. When both values are described, the operational one will be first. For all parameters besides QUOTE, the operational value is the RECEIVE. After a transfer, the operational values will be unchanged, but the others (as displayed by SHOW) will reflect the parameters specified by the other Kermit. The underlying defaults established by previous SET subcommands will still be in effect. In the syntax descriptions, mode is SEND or RECEIVE. 0 END-OF-LINE 0Syntax: SET mode END-OF-LINE number 0RECEIVE should not be changed. 0SEND may be needed to establish contact. If the other system needs packets to be terminated by anything other than carriage return, specify the decimal value of the desired ASCII character. number must be in the range 0-31 (decimal). The default is 13 (CR). 0 PACKET-SIZE 0Syntax: SET mode PACKET-SIZE number 0RECEIVE defines number as the maximum length for incoming packets. The valid range is 26-9024, but 94 is the limit for normal short-packet protocol. The default is 80. Specifying a value greater than 94 is necessary and sufficient to enable the long-packet protocol for transfers to Kermit-370 (provided the other Kermit is willing). Kermit-370 will actually accept long packets in any case, but the protocol requires that the other Kermit not send them unless Kermit-370 asks. Raising this value from the default is a good candidate for inclusion in INIT files. In practice, the packet size may be limited by hardware and programming considerations. See the system-specific chapters for details. 0SEND might be needed for sending files to a minimal Kermit that neither specifies a buffer size in the Send-Init sequence nor can accept the default (80). It may also be used to specify the packet size for a "raw" download via the XTYPE subcommand. This parameter has no other function and is completely irrelevant to long packets. If the other Kermit asks for long packets, Kermit-370 will always comply. 0 PAD-CHAR 0Syntax: SET mode PAD-CHAR number 0RECEIVE defines number as the character to be used by the other Kermit for pad- ding packets. The character must be an ASCII control character (in the range 0-31). The default is 0 (NULL). This option is seldom useful. 11.4. Kermit-370 Subcommands Page 28 0------------------------------------------------------------------------------- SEND may be needed to establish contact if the other Kermit (or the transmis- sion line) needs padded packets. 0 PADDING 0Syntax: SET mode PADDING number 0RECEIVE defines the number of pad characters to be used for padding packets from the other Kermit. This number may be anywhere from 0 to 94. The default is 0. This option is seldom useful. 0SEND may be needed to establish contact if the other Kermit (or the transmis- sion line) needs padded packets. 0 PARITY 0Syntax: SET mode PARITY MARK or NONE 0RECEIVE specifies the parity expected in the transparent-mode ASCII data received by the mainframe from a full-screen device. Such data will typically have either all Mark parity (seven data bits with the eighth bit set) or no parity (eight data bits). This is typically not the same as the parity used in communications between the protocol convertor and the terminal. Kermit-370 must know which kind of parity to expect in order to calculate checksums properly. Since Kermit-370 does not actually verify parity, the other possible variants (ODD, EVEN, and SPACE) are lumped together with MARK parity for the purpose of this subcommand, which merely chooses between 7-bit and 8-bit data transfer. The default is MARK. 0SEND is also an operational value, specifying the parity to be used in con- structing outgoing data packets on full-screen devices. NONE is the default and is generally preferable, in that it permits binary transfers without the need for eighth-bit prefixing, but MARK may be required in some configurations. 0 QUOTE 0Syntax: SET mode QUOTE char 0SEND indicates a printable character for prefixing (quoting) control characters and other prefix characters. The only good reason to change this would be for sending a file that contains many "#" characters (the normal control prefix) as data. It must be a single character with ASCII value 33-62 or 96-126 (decimal). 0RECEIVE would be needed only for talking to a crippled Kermit that uses a non-standard quoting character, but does not admit it. 11.4. Kermit-370 Subcommands Page 29 0------------------------------------------------------------------------------- START-OF-PACKET 0Syntax: SET mode START-OF-PACKET number 0RECEIVE defines number as the character to be expected to mark the start of packets from the other Kermit. The character must be an ASCII control charac- ter (in the range 0-31). The default is 1 (SOH). This may need to be changed to establish contact. 0SEND may also need to be changed to establish contact. It defines number as the character to be used to mark outgoing packets. 0 TIMEOUT 0Syntax: SET mode TIMEOUT time 0RECEIVE defines the time in seconds the other Kermit is to wait for a response from Kermit-370 before resending a packet. The default is 5. A value of 0 means the other Kermit should wait indefinitely. 0SEND may be needed to define the time in seconds Kermit-370 is to wait for a response from the other Kermit in the initial packet exchange, although the default value 0 (indefinite wait) is probably satisfactory, especially since Kermit-370 in many cases cannot time out anyway. Specifying a non-zero value will prevent the other Kermit from ever requesting infinite "patience" from Kermit-370. 0 THE SHOW SUBCOMMAND 0Syntax: SHOW [option] 0The SHOW subcommand displays the values of all parameters that can be changed with the SET subcommand, except ATOE, ETOA, TATOE, and TETOA (for those, see the TDUMP subcommand). If specified, option can be a particular parameter or the keyword "ALL" (the default). Groups of parameters, such as SEND, can be displayed by requesting the group name, or individual sub-parameters can be displayed by specifying the complete name. For example, 0 SHOW RECEIVE EOL 0will display the decimal value of the packet terminator that Kermit-370 cur- rently expects, i.e., 13. Similarly, 0 SHOW FOREIGN 0will display the character strings currently in use for prefix and suffix on each outgoing filespec. When "ALL" is specified or implied, all parameters other than the attribute switches are displayed. 11.4. Kermit-370 Subcommands Page 30 0------------------------------------------------------------------------------- THE STATUS SUBCOMMAND 0Syntax: STATUS 0This subcommand displays information about the previously executed subcommand. The response will include either the appropriate error message or the message "No errors". The initial status is "No file transfers yet". If the status reflects an error condition, the name of the last file used (excluding TAKE files) will be displayed as well. If the error was detected by the other Ker- mit, the message will be "Micro aborted" followed by the text from the Error packet. Conversely, if Kermit-370 detected the error, the text of the status message will have constituted the error packet sent out. In any case, if the last file transfer was cancelled (by virtue of an attribute mismatch or manual intervention), the reason for cancellation is displayed. Also, if the error occurred in disk I/O, any available explanatory information is displayed. Nor- mally, the error status is altered only when a transfer-initiating subcommand (SEND or RECEIVE) is executed, but there are several exceptions. If an invalid subcommand is entered, the status becomes "Kermit command error", and the next subcommand entered will reset the status. Also, in server mode every subcom- mand is received through a transfer from the other Kermit and may affect the status (except the STATUS subcommand itself, of course). 0Other information is also included. When Kermit-370 has been forced to trun- cate one or more records in the last RECEIVE operation (because of the current maximum record length), the number of records truncated is reported. The status display also includes throughput statistics for the last transfer: num- ber of files sent, duration, number of packets, number of retries, and averages of bytes/packet and bytes/second. These last two quantities are calculated separately for bytes sent and received on the communication line (including padding, if any), and the last quantity is also calculated on the basis of the number of bytes read from or written to disk. Further, if retries were neces- sary, Kermit-370 computes the optimum packet size assuming the retries to have been due to sparse, Poisson-distributed bursts of noise. This is the same heuristic optimum that Kermit-370 computes and uses as an alternative packet-size limit when sending long packets. If TEST is set on, Kermit also reports the maximum size attained by its storage stack since execution began. 0 THE STOP SUBCOMMAND 0Syntax: STOP 0This is not a subcommand in the usual sense. Instead, it is a command string that can be entered on the communication line while Kermit-370 is in protocol mode and will cause protocol mode to cease immediately. This may be useful if the other Kermit has crashed. The word "stop" may be entered in either upper or lower case, but it must be the only character string in the "packet" in question. 11.4. Kermit-370 Subcommands Page 31 0------------------------------------------------------------------------------- THE TAKE SUBCOMMAND 0Syntax: TAKE filespec 0Execute Kermit subcommands from the specified file, usually called a TAKE file. The TAKE file may in turn include TAKE subcommands, and the nesting may con- tinue to a depth of ten. If a TAKE file includes the subcommand SERVER, however, the nesting count is saved and starts over again in server mode in case the client Kermit should transmit a REMOTE KERMIT TAKE command. The user has the option of seeing the subcommands echoed from the TAKE file as they are executed and also the option of automatically exiting from a TAKE file on er- ror. See the subcommand SET TAKE for details. 0 THE TDUMP SUBCOMMAND 0Syntax: TDUMP table-name or NAMES 0This displays the contents of table-name. The same table can be modified using the SET subcommand. The ATOE, ETOA, TATOE, and TETOA tables can presently be displayed and changed. The NAMES table is the transaction log for the last transfer, consisting of the filespec of each file sent or received, along with the size (in Kbytes) and any error messages. 0 THE TYPE AND XTYPE SUBCOMMANDS 0Syntax: [X]TYPE filespec 0These subcommands display the named file. TYPE is effectively a synonym for (and allows the same options as) the host system command for displaying files at the terminal, but XTYPE performs a raw file transfer on the current com- munication line (which need not be the terminal) according to the current CON- TROLLER setting. Thus, XTYPE uses transparent mode if CONTROLLER is SERIES1, GRAPHICS, or AEA. Also, it sends the data in bursts no larger than the current SEND PACKET-SIZE. Since XTYPE is basically a modified SEND, the options al- lowed on the filespec for SEND are also allowed for XTYPE. 0 1.5. Before Connecting to the Mainframe 0Several options must be set in the micro Kermit before connecting to an IBM 370 system as a line-mode device. You should set LOCAL-ECHO to ON (to indicate half-duplex). This is the norm but not true in absolutely every case; if each character appears twice on your terminal screen, set LOCAL-ECHO to OFF. FLOW-CONTROL should be set to NONE, and on some systems HANDSHAKE should be set to XON. The parity should be set according to the system's specifications. On some micro Kermits, all of the above is done in one step using the DO IBM macro (or SET IBM ON). Set the baud rate to correspond to the line speed. 0Connecting through a full-screen device also requires that certain options be set in the micro Kermit. You should set LOCAL-ECHO to OFF (to indicate full-duplex). FLOW-CONTROL should be set to XON/XOFF, and HANDSHAKE should be set to OFF. For many systems, the PARITY should be set to EVEN. Set the baud rate to correspond to the line speed. 0One exception to these rules is the case where the micro Kermit is attempting 11.5. Before Connecting to the Mainframe Page 32 0------------------------------------------------------------------------------- automated file transfer, e.g., downloading several separate files from Kermit-370 running in server mode. In fact, under those circumstances, hand- shaking is necessary even with "SERIES1" connections, and the two Kermits must be instructed to adopt a common handshake character (e.g., by SET HANDSHAKE 10 to Kermit-370 and SET HANDSHAKE LF to the micro). 0In any case, you should make sure that either the micro Kermit or Kermit-370 will provide timeouts during file transfers (if not both). Some variants of Kermit-370 (notably CMS) cannot provide timeouts, and you may need to set the TIMER to ON in the micro. 0When you are connecting through a protocol convertor, it is useful to know the key sequence that causes the screen image to be repainted from the controller's memory. In many cases, it is CTRL-V, although CTRL-G and CTRL-C are also some- times used. In general, this sequence should be typed whenever reconnecting to Kermit-370 after being in Kermit protocol mode (and sometimes after merely es- caping to the local Kermit), since the local Kermit may have modified the screen. 0 1.6. Trouble-shooting Protocol Converters 0Many, but not all, protocol converters have transparent modes that permit Ker- mit file transfers. The welter of competing and often incompatible communica- tions devices would cause a major headache, except for three circumstances. First, Kermit-370 has routines for automatically detecting which kind of front end is controlling the current session; second, the Kermit installer is en- couraged to tailor Kermit to force the correct choice of CONTROLLER whenever those routines don't work properly; and, third, Kermit offers a last-resort mode of operation that will work with almost any protocol converter. Because of the limitations in the catch-all mode (known as FULLSCREEN mode), it is still best to take advantage of the transparency, if any, in the protocol con- verter, and the automatic detection routines still play an important role. It will be instructive to outline what those routines actually do and how they can go wrong. 0 Recognizing a Series/1 0Although protocol converters are advertised as simulating the behavior of IBM 3270-type terminals, there generally are differences which could be used to distinguish each type of device from the others and from real 3270-type ter- minals. However, all that really matters to Kermit-370 is whether there is a transparent mode available such that file transfers can be carried out. To date, only three fundamentally different transparent modes have been reported to Columbia, and it seems likely that no others have been (or, perhaps, ever will be) implemented. All are supported by Kermit. 0Kermit-370 recognizes these front ends automatically by making two simple tests. The first takes advantage of one of the advanced features first im- plemented in the Yale ASCII system and subsequently copied in many of the devices that adopted the same transparent mode. This feature is a special 3270 data-stream order which requests a status report from the protocol converter. Kermit sends this order and then reads the "3270 screen". If Kermit sees a valid status report, it sets CONTROLLER to SERIES1 and stops testing. 11.6. Trouble-shooting Protocol Converters Page 33 0------------------------------------------------------------------------------- Two catches 0Obviously, the Yale status order is not implemented in most other kinds of hardware. Thus, the order would be rejected by a non-Yale-type controller, and that could have undesirable side effects on the hardware. However, hardware is generally designed to be robust -- the real drawback lies in the side effects on certain communications software (notably VTAM/TSO), which may respond badly while trying to protect the robust hardware from illegal orders. If it proves impossible to make the external software behave properly, the only recourse is to modify Kermit-370 to skip the first test altogether and possibly to force the CONTROLLER setting; this modification is described in the relevant "Beware" file in a note dated 89/2/27. 0Catch Two is that the status order is not implemented in all of the devices that support Yale-ASCII-style transparent mode. This means that some devices "fall through the cracks" in this procedure. A site where such devices are used may find it expedient to modify Kermit (following the same "Beware" pat- tern) to force the procedure to set CONTROLLER to SERIES1 (assuming there are no other protocol converters also in use that support one of the other trans- parent modes). A list of such devices can be found in a footnote in the Kermit distribution file ik0aaa.hlp. 0 Recognizing a 3174 0The second diagnostic test uses a hardware command (Read Partition Query) that is defined by IBM, but is not implemented on all 3270-type equipment. There is, thus, the same danger as in the first test, but the danger appears to be slight. Indeed, both CMS and TSO allow a user program to know in advance whether a Query is permitted. The Query response consists of one or more structured fields, and the 3174 AEA ASCII Graphics system (the only device with the AEA style of transparency) is easily identified by the appearance and con- tent of a particular type of field. In fact, it is possible to tell from the Query data whether the particular 3174 line is allowed to use the ASCII Graphics transparency. Therefore, this test has three possible outcomes: Ker- mit may detect a transparency-enabled 3174 line (and set CONTROLLER to AEA); it may detect an incapable 3174 line (and set CONTROLLER to NONE); or it may detect "none of the above" (and set CONTROLLER to GRAPHICS). Thus, aside from the exceptions already noted, GRAPHICS simply means that the front end either supports SAS-style transparency or none at all. 0 Fallback positions 0What should you do when the automatic detection fails? Obviously, the first thing is Be Prepared. Often, the misbehavior of VTAM can be halted by pressing ENTER or PA1, so you should be sure to know how to generate a PA1 when trying out Kermit on an unfamiliar type of protocol converter. Also, you should know what kind of transparency to expect for the front end and verify that Kermit-370 has, in fact, set CONTROLLER appropriately. This means checking the list of devices in the Kermit distribution file ik0aaa.hlp. If your configura- tion is listed as unsupported, you may be wasting your time, but the list is not necessarily up-to-date. If your configuration is not listed at all, you have the opportunity to be a pioneer and report your findings back to Columbia for inclusion in future editions of the list. There are a few rules of thumb for quickly deducing the controller type by reading the manuals for the device; 11.6. Trouble-shooting Protocol Converters Page 34 0------------------------------------------------------------------------------- the manuals may not be specific enough, but this is clearly the easiest way of determining whether Kermit can support a given device and which controller type is applicable. The rules are as follows (in order of simplicity and likelihood): 0 1. GRAPHICS or SERIES1 may be implied when the device has a transparent or graphics mode described as compatible with that of a supported device listed in ik0aaa.hlp. 0 2. SERIES1 is implied when the device runs the "Yale ASCII Communica- tion System" or something with a similar name. 0 3. GRAPHICS is implied if the manual mentions the SAS Institute in the context of ASCII graphics. 0 4. GRAPHICS is implied when output transparent data may be preceded by a WCC (Write Control Character) and 70 (hex). 0 5. SERIES1 is implied when transparent data must be preceded by a WCC and either 115D7F110005 (write-read) or 115D7F110000 (write-only). 0 6. GRAPHICS or SERIES1 may be implied when some of the manufacturer's other products are listed in ik0aaa.hlp, and all are shown as being of one type. 0 7. If none of the above rules apply, but the manuals describe a trans- parent mode in detail, the device may be a totally new type. The distribution file ik0con.hlp has hints on implementing Kermit sup- port for the new type. 0 8. If nothing else works, you can probably use FULLSCREEN mode, as long as the micro Kermit supports it. 0If Kermit tries to transfer a file with the wrong CONTROLLER value, there is a distressing possibility for the session to lock or, at least, appear to lock. When and if this happens, be sure to connect back to the mainframe, type "STOP", and press ENTER several times (perhaps as many as 15 times) before taking any drastic steps like breaking the connection. "STOP" is a special es- cape mechanism for getting out of Kermit protocol mode quickly. Kermit-370 recognizes such a request in most situations where terminal I/O is not entirely frozen. Sometimes, apparent lock-ups are due to something as simple as incor- rect parity settings in the micro Kermit, so always check the basic communica- tion settings and, if necessary, experiment before trying a different CON- TROLLER type. Also, to avoid unnecessary confusion, check for the existence of a Kermit initialization file (possibly created by the installer) which could be re-setting CONTROLLER after the automatic procedure has finished. Such a re-setting is a poor idea in an initialization file, even a personal one, un- less there is absolutely only one kind of communications equipment on your sys- tem. 0If file transfers do not work at first, it is best to do the following before trying again: 0 1. Reduce the packet size to no more than 80 at both ends. 0 2. Enable 8th-bit quoting at both ends. 11.6. Trouble-shooting Protocol Converters Page 35 0------------------------------------------------------------------------------- 3. Set SEND PARITY MARK in Kermit-370. 0If those changes do not make transfers work, the next remedial action depends on the symptoms of failure. 0 - No packets exchanged and session locked up after reconnecting: change packet characters in both directions. 0 - No packets exchanged, but no lockup: change packet characters or parity. 0 - Always multiple retries of third or fourth packet: reduce receiving packet size. 0 - Multiple retries after random number of packets: check hardware and cables. 0 - Multiple retries after file-dependent number of packets: check for equipment that intercepts one or more printable characters or reduce the packet size. 0When all else fails, you should be ready to reset CONTROLLER by hand and try again. The change most likely to be necessary is from GRAPHICS to SERIES1. However, it is conceivable that the installer has modified Kermit-370 at your location to force the CONTROLLER setting from the start, in which case, you might need to go the other way. Normally, Kermit's diagnostic procedure at start-up takes one or two seconds (because of programmed delays), so you should be suspicious if the Kermit prompt appears immediately after you start the program. The only initial CONTROLLER setting that you should not change by hand is NONE, which means that Kermit-370 has recognized a 3174 AEA line that is not configured for file transfer (or else the Kermit installer has a warped sense of humor). 0If no amount of experimenting gets a transparent mode to work, it is time to recheck the list of supported devices and the age of your equipment. If yours is very old, it may require new microcode or some other software or hardware upgrade. In any case, if your results (whether positive or negative) are not already shown in ik0aaa.hlp, you should report them to Columbia so that others may profit by your experience. 0 1.7. After Returning from Kermit-370 0When Kermit-370 receives a QUIT or EXIT subcommand or finishes the subcommand or subcommands specified in the original command string that invoked Kermit, control is returned to the caller. Before returning, Kermit-370 closes any ac- tive TAKE files (the EXIT or QUIT subcommand may be issued from a TAKE file). On return, the completion code is set from the current error status according to the codes in Table 1-4. 0The error codes in Table 1-4 bear no relationship to the severity of the as- sociated error conditions, aside from the assignment of code 0. The underlying rationale is that the only current generic system for the treatment of comple- tion codes is to take a non-zero code as an indication of error. Indeed, Ker- mit returns a completion code of 0 when "error" condition 1 holds. 11.8. What's New Page 36 0------------------------------------------------------------------------------- ------------------------------------------------------------------------------- 0 Code Symbol Error Message 0 NOE No errors 1 NFT No file transfers yet 2 TRC Transfer cancelled 3 USC Invalid server command 4 TIE Terminal I/O error 5 BPC Bad packet count or chksum 6 IPS Invalid packet syntax 7 IPT Invalid packet type 8 MIS Lost a packet 9 NAK Micro sent a NAK 10 ABO Micro aborted 11 FNE Invalid file name 12 FNF File not found 13 FUL Disk or file is full 14 DIE Disk I/O error 15 MOP Missing operand 16 SYS Illegal system command 17 KCE Kermit command error 18 TIM No packet received 19 RTR Records truncated 20 COM Bad communication line 21 PTY 8th-bit quote not set 22 FTS File too short 23 SOH Missing start-of-packet 24 OPT Option error on filespec 25 DSP Unable to dispose of file 0 Table 1-4: Error messages and codes for Kermit-370 0 0------------------------------------------------------------------------------- 0 1.8. What's New 0Below is a list of the changes in Version 4.2.3 of Kermit-370. 0 1. Compatibility with the (aging) F-level assembler. 0 2. Support for LATIN2, LATIN3, TRANSPARENT, CP870, CP905, and CP880, as well as the aliases L1, L2, and L3. 0 3. Support for IBM 3174 ASCII Graphics mode. 0 4. Support for REMOTE PRINT, REMOTE MAIL, and REMOTE SUBMIT. 0 5. Improved error message for bad packet-size, new alias PACKET-LENGTH for PACKET-SIZE. 0 6. Correct observance of FILE COLLISION for all files in a group. 0 7. Ignoring spurious flow-control "packets" from (for example) 11.8. What's New Page 37 0------------------------------------------------------------------------------- MS-Kermit. 0 8. Support for new locking-shift Kermit protocol. 0 9. Support for Japanese Kanji file transfer. 0 10. New FULLSCREEN controller type. 0 11. New HINTS subcommand. 0 12. More graceful recovery from terminal I/O errors and exceptions. 0 13. Support for SNA LU1 3770-type devices and 8-bit, no-parity devices. 0 14. Automatic conversion of EBCDIC printer carriage control into ASCII control characters. 0 15. Support for STOP command on "dumb" 3270 terminals and PCI protocol converters. 0 16. New efficiency display in STATUS report, based on SPEED setting. 0 17. 8-bit XECHO output. 0 18. Control prefixing for C1 controls. 0 19. New VERSION subcommand. 0 20. Improved debugging facilities. 0 1.9. What's Missing 0Work on Kermit-370 will continue. Features that need to be improved or added include: 0 - Implement file archiving. 0 - Implement file transfer checkpointing. 0 - Add SET REPEAT subcommand. 0 - Improve Kermit-370 operation as a local Kermit. 0 - Implement public server mode. 0 - Add new SET FILE LONGLINE DISCARD option to allow multi-file transfer to proceed past a truncation problem. 0 - System-specific upgrades; see the respective chapters for details. 0Anyone interested in working on these or other improvements should first get in touch with the Center for Computing Activities at Columbia University to find out if someone else has already begun a similar project (and, if so, who). 11.10. Further Reading Page 38 0------------------------------------------------------------------------------- 1.10. Further Reading 0Below is a list of references for some of the material in this chapter. 0 1. About Type: IBM's Technical Reference for 240-Pel Digitized Type, S544-3156-02 (1989). This manual contains visual tables of many EBCDIC code pages and a comprehensive list of character names and acronyms. 0 2. IBM System/370 Reference Summary, GX20-1850-3 (1976). This refer- ence card contains EBCDIC and ASCII character codes. 0 3. IBM VS Fortran Application Programming: Language Reference, GC26-3986-1 (1982). Appendix E contains a table of EBCDIC and ASCII characters with an implied full 256-byte translation table. 0 4. IBM 3174 Character Set Reference, GA27-3831-02 (1990). Chapter 5 contains visual tables of many EBCDIC code pages. 0 5. Info-Kermit Digest Vol. 11 #1 (1989). This issue contains draft specifications of some Kermit protocol extensions. 0 6. ISO International Register of Coded Character Sets to be used with Escape Sequences (1989). This (very large) document has complete and unambiguous descriptions of standard coded character sets. It can be obtained from the ECMA. 0 7. Kermit, A File Transfer Protocol by Frank da Cruz; Digital Press (1987). This book contains a thorough description of the Kermit protocol and services with copious examples. 0 8. Kermit distribution file ISOK5.TXT (1990). This preliminary draft describes the new transfer protocol, including the international character-set support. 0 9. Kermit News Vol. 3 #1, p.5, "Dynamic Packet Size Control" (1988). This article describes an algorithm for optimizing Kermit throughput in the face of line noise. 0 10. Kermit News #4, p.16, "International Character Sets" (1990). This article discusses the new transfer protocol. 0 11. ASCII and EBCDIC Character Set and Code Issues in Systems Applica- tions Architecture, SHARE white paper by Edwin Hart (1989). This document, available as file SHARE REQUIRE from LISTSERV@JHUVM, lays out general considerations for character codes and translatability. 12. IBM MUSIC/SP KERMIT Page 39 0------------------------------------------------------------------------------- 2. IBM MUSIC/SP KERMIT 0Program: John Chandler (Harvard/Smithsonian Center for Astrophysics); contributions from Pierre Goyette (McGill U), Vace Kundakci and Daphne Tzoar (Columbia U), Bob Shields (U. Maryland), Greg Small (UC Berkeley), Clark Frazier (Harvard Bus. Sch.), Bob Bolch and Steve Blankinship (Triangle), Andre Pirard (U. Liege) Language: IBM/370 Assembler Documentation: Pierre Goyette Version: 4.2.0 (90/3/13) Date: 1990 March 0 Kermit-MUSIC Capabilities At A Glance: 0 Local operation: No Remote operation: Yes Transfers text files: Yes Transfers binary files: Yes Wildcard send: Yes ^X/^Z interruption: Yes (through micro) Filename collision avoidance: Yes Can time out: Yes (line mode only) 8th-bit prefixing: Yes Repeat count prefixing: Yes Alternate block checks: Yes Terminal emulation: No Communication settings: No Transmit BREAK: No Packet logging: Yes Transaction logging: Yes Session logging: No Raw transmit: Yes (no prompts) Sliding window: No Long packets: Yes Act as server: Yes Talk to server: Yes Advanced server functions: Yes Advanced commands for servers: Yes Local file management: Yes Handle Attribute Packets: Yes Command/init files: Yes Command macros: No 0 MUSIC Specifics of Kermit-370: 0 Global INIT file: SYSTEM.KERMINI User INIT file: KERMIT.INI Debug packet log: KERMIT.LOG Server reply log: KERMIT.REPLY Maximum packet size: 1913 (7171), 230 (TTY) Maximum disk LRECL: 32767 0Kermit-MUSIC is a member of the generic Kermit-370 family and shares most of the features and capabilities of the group. As its name implies, Kermit-MUSIC 12. IBM MUSIC/SP KERMIT Page 40 0------------------------------------------------------------------------------- is the variant of Kermit-370 that runs under the MUSIC/SP operating system. The primary documentation for Kermit-MUSIC is actually the chapter on Kermit-370 (entitled IBM 370 Kermit), which describes general properties; the present chapter assumes the reader is familiar with that material. Only the details specific to MUSIC operation will be discussed here, e.g., command syn- tax relating to the MUSIC file system or commands not offered in general by Kermit-370. 0 2.1. The MUSIC/SP File System 0The features of the MUSIC file system of greatest interest to Kermit users are the format of file specifications (or filespecs) and the concept of records. The latter is described in the Kermit-370 chapter. 0The MUSIC filespec (called a Save File) takes the form 0 [code:]filename 0The filename can be up to 17 characters in length and consists of one or more substrings joined by periods. The substrings can contain any of the following characters: 0 A through Z, 0 through 9, national characters # $ @ 0The only restriction is that the first substring must start with a letter or a national character. You may also prefix the filename with a 4-digit code if you have enough privileges. By default, the "working directory" will be set to the your signon code. All files on this code can be accessed directly. If you have enough privileges and wish to transfer files to or from a MUSIC code other than your signon code, you may change the "working directory" to the new code. 0MUSIC/SP allows a group of files to be specified in a single filespec by in- cluding the special "wildcard" characters "*" and "?". A "*" matches any string of characters (even a null string) from the current position to the end of the field; a "?" matches any single character. It is important to remember that the period is part of the filename. Unlike a PC, the file specification "*" will match all filenames. Here are some examples: 0 *.COBOL All files of that end with .COBOL 0 F* All files whose names start with F. 0 ? All files with one-character filename. 0MUSIC files, like those in other IBM 370 systems, are record-oriented (see the introduction to the Kermit-370 chapter). In particular, MUSIC files are characterized by record format (RECFM), which may be fixed-length or varying-length, and by maximum record length (LRECL). The size of record blocks is irrelevant, however, because MUSIC performs the blocking and deblock- ing operations automatically and transparently, including the spanning of records across block boundaries. Records in MUSIC files may be up to 32767 bytes long. A third record format, namely, undefined-length, is possible in MUSIC, but is rarely used and is not supported by Kermit-MUSIC at present. 0Another file system feature of occasional interest is the means of reporting 12.1. The MUSIC/SP File System Page 41 0------------------------------------------------------------------------------- errors. When Kermit-MUSIC encounters a disk error, it attempts to prepare an explanatory message for inclusion in the STATUS report. The explanations can be found in the MUSIC reference manual under the MFIO Error Codes section. 0 2.2. Program Operation 0At startup time, Kermit-MUSIC looks for two initialization files, *COM:SYSTEM.KERMINI and KERMIT.INI. If either of or both of these files exist, they will be read and executed. If they do not exist on your code, Kermit will still attempt to locate the public verion of the system file. The file SYSTEM.KERMINI should be saved as a PUBLIC file by a systems programmer, preferably the same code where the Kermit executable module is kept. The file KERMIT.INI can be maintained by the user on any code. 0One important distinction between Kermit-MUSIC and other Kermits is that a program running under MUSIC/SP is unable to interrupt a read on the terminal if you are connected through a 7171 or Series/1 protocol converter. This means that the MUSIC variant of Kermit cannot time out after sending a packet on such devices. The only way to time out is from the other side: typing a carriage return to the local Kermit causing it to retransmit its last packet, or an automatic timeout as provided by most other Kermits. 0If you are connecting to MUSIC through a 7171 or Series/1 protocol converter, then no handshaking is required since Kermit-MUSIC can control the data sent to the micro Kermit. But if you are connected as a "TTY" terminal (through a 370x type line), then you must enable handshaking on the micro Kermit. This is be- cause the MUSIC/SP system will add an XON (X'11') character to the end of every packet sent. The micro Kermit must not reply with the next packet before the XON character is received. Usually the command "SET HANDSHAKE XON" or "SET HANDSHAKE 17" on the micro Kermit will do this. 0 Interactive Operation: 0To run Kermit-MUSIC interactively, invoke the program from MUSIC by typing KER- MIT. When you see the prompt, 0 Kermit-MUSIC> 0you may type a Kermit subcommand. When the subcommand completes, Kermit issues another prompt. The cycle repeats until you exit from the program. For ex- ample: 0 KERMIT 0 Kermit-MUSIC Version 4.2.0 (90/3/13) Enter ? for a list of valid commands 0 Kermit-MUSIC>send foo.* 0 Files with prefix FOO. are sent 0 Kermit-MUSIC>receive test.spss 0 File is received and called TEST.SPSS 12.2. Program Operation Page 42 0------------------------------------------------------------------------------- Kermit-MUSIC>exit 0 Command Line Invocation: 0Kermit-MUSIC may also be invoked with a command line argument from MUSIC. The argument is interpreted as a subcommand to be executed by Kermit after comple- tion of the initialization. For instance: 0 KERMIT send test.fortran 0or 0 KERMIT server 0Kermit will exit and return to MUSIC after completing the specified subcommand. 0 Server mode: 0Command execution in server mode is different in several respects from normal operation. First of all, some Kermit subcommands are not allowed (see the list of subcommands in the Kermit-370 chapter). Moreover, command errors always terminate any active TAKE file. 0 2.3. Kermit-MUSIC Subcommands 0Kermit-MUSIC supports all the subcommands described in the Kermit-370 chapter, plus one more: "MUSIC", which is a synonym for the generic subcommand "HOST". This section concentrates on the subcommands that have special form or meaning for Kermit-MUSIC. These are ordered alphabetically. See the chapter on Kermit-370 for further details. 0 THE CWD SUBCOMMAND 0Syntax: CWD code 0The CWD (Change Working Directory) subcommand establishes a new default code. code may be any valid 4-digit MUSIC code. Subsequent file transfers take place preferentially to and from the default code. The initial code is the user's signon code. 0 THE DIRECTORY SUBCOMMAND 0Syntax: DIRECTORY [filespec] 0Under Kermit-MUSIC, the DIRECTORY subcommand is similar to the MUSIC LIBRARY command. DIRECTORY will also display the number of lines in a file. 12.3. Kermit-MUSIC Subcommands Page 43 0------------------------------------------------------------------------------- THE HELP SUBCOMMAND 0Syntax: HELP 0This subcommand displays information on the use of Kermit-MUSIC. 0 THE MUSIC SUBCOMMAND 0Syntax: MUSIC text of command 0Currently, MUSIC does not support the execution of host commands under Kermit-MUSIC. However, the MUSIC commands LIBRARY, PURGE, RENAME, COPY, and LIST are simulated by Kermit itself, thus providing a set of subcommands for managing local files. The subcommand MUSIC is synonymous with the generic sub- command HOST. 0 THE RECEIVE SUBCOMMAND 0Syntax: RECEIVE [filespec] 0The RECEIVE subcommand tells Kermit to receive a file or file group from the other system. You should then issue a SEND subcommand to the other Kermit. 0If the optional filespec is omitted, Kermit-MUSIC will use the name(s) provided by the other Kermit. If that name is not a legal MUSIC file name, Kermit-MUSIC will delete excess characters and will change illegal characters to dollar signs. A filespec in the subcommand indicates what name the incoming file should be given. Wildcards may not be used. If the optional filespec is provided, but more than one file arrives, the first file will be stored under the given filespec, and the remainder will be stored under their own names on the default code. 0For purposes of folding and truncation, the maximum record length for a received file is 32767 if RECFM is V and "LRECL" if RECFM is F. 0If the incoming file has the same name as an existing file, the action taken depends on the FILE COLLISION setting. The possible settings and their mean- ings are given in the Kermit-370 chapter. Two of the settings (BACKUP and RENAME) require that Kermit-MUSIC change the incoming name so as not to obliterate the pre-existing file. It attempts to find a unique name by succes- sively modifying the original and checking for the existence of such a file at each step. The procedure begins by truncating the filename to fifteen charac- ters if necessary, and then appending "$0". If a file by that name exists, Kermit then replaces the "0" with a "1". It continues in this manner up to "9", and if an unused name cannot be found, the transfer fails. 12.3. Kermit-MUSIC Subcommands Page 44 0------------------------------------------------------------------------------- THE SEND SUBCOMMAND 0Syntax: SEND [filespec[<options>] [foreign-filespec]][, ...] 0The SEND subcommand causes a file or file group to be sent from MUSIC to the Kermit on the other system. Kermit-MUSIC will remove any code prefix for the file header of the outgoing file. The filespec may contain the wildcard characters "*" or "?". If it does, then all matching files will be sent. For details on the options, see the chapter on Kermit-370. There must be no blanks between the filespec and the options, if any. 0The foreign-filespec, if any, is used for the file header of the outgoing file, replacing the usual filename copied from the MUSIC filespec. If wildcards are present in the filespec, then no foreign-filespec should be specified. 0 THE SET SUBCOMMAND 0Syntax: SET parameter [value] 0The SET subcommand establishes or modifies various parameters controlling file transfers. The following SET parameters are available in Kermit-MUSIC, but not in Kermit-370 in general: 0DELIM Line delimiter for entering multiple commands. DESTINATION Default Code. FILE LRECL Logical Record length for incoming file. RECFM Record format for incoming files. 0 SET DELIM 0Syntax: SET DELIM [letter] 0This sets (or clears) a command line delimiter for interactive Kermit subcom- mands. Each occurrence of the delimiter character in the command buffer read from the terminal is treated as the start of a new subcommand. The initial value is a blank, i.e., no delimiter. 0 SET DESTINATION 0Syntax: SET DESTINATION code 0This subcommand is equivalent to the CWD subcommand (q.v.). 0 SET FILE LRECL 0Syntax: SET FILE LRECL number 0This sets the logical record length for incoming files to a number from 1 to 32767 (32K-1). This variable is used only for fixed format and binary files. The default is 80. 12.3. Kermit-MUSIC Subcommands Page 45 0------------------------------------------------------------------------------- SET FILE RECFM 0Syntax: SET FILE RECFM option 0This subcommand sets the record format to use for incoming files. Valid options are "Fixed" and "Variable" (the default). Fixed-format records are padded, folded, or truncated, as needed, to the current LRECL. Note: these two formats correspond to FC and VC in standard MUSIC nomenclature. MUSIC formats F, V, and U are not supported. 0 THE SPACE SUBCOMMAND 0Syntax: SPACE 0This subcommand displays the storage allocation on the default code. The available space is calculated by subtracting the current allocated space from the total space available to the user's code. 0 2.4. How to build an executable version of Kermit-MUSIC 0Before attempting to build Kermit-MUSIC, look in the Kermit distribution under IKMKER for an installation document, as well as "beware", help, and update files, and read them first. They will probably contain information that is more current and more detailed than what you see here. 0Kermit-MUSIC consists at present of a few small jobs that (a) build GUPI (Generic Update Program), (b) use GUPI to apply the current fixes to the base code, and (c) assemble and link the updated Kermit source. The source for Ker- mit and GUPI itself is in many pieces, some generic for Kermit-370 and some specific to MUSIC. All the necessary pieces are sequenced in columns 73-80 so that the numbers form a strictly increasing sequence when the pieces are cor- rectly "pasted" together. It is important to preserve the original sequence numbers so that updates can be applied to the source. 0To create a runnable version: 0 1. Collect the following "ASM" files from the Kermit distribution onto the code $KRM with RECFM FC and LRECL 80: IK0DOC, IK0MAC, IKMMAC, IK0DEF, IK0MAI, IK0COM, IK0CMD, IKMUTL, IK0PRO, IK0GUP, and IKMGUP. The files must have an extension of ".S". 0 2. Assemble and link the Generic Update Program GUPI, producing $KRM:GUPI.LMOD. Before assembling the GUPI program, you must change the IK0GUP module. Edit the file $KRM:IK0GUP.S and convert all COPY pseudo-instructions into macro invocations. This is easily achieved by removing the word "COPY" from in front of the copy block's name. There are only 5 occurences of this and they are all in column 10. The source for GUPI consists of the combination IK0MAC, IKMMAC, IKMGUP, and IK0GUP. 0 3. Build the base Kermit source so that you can apply the modifications to it. Merge the source files in the order IK0DOC, IK0MAC, IKMMAC, IK0DEF, IK0MAI, IK0COM, IK0CMD, IKMUTL, IK0PRO, and save the result as $KRM:KERMIT.BASE.S. 12.4. How to build an executable version of Kermit-MUSIC Page 46 0------------------------------------------------------------------------------- 4. Apply the updates using GUPI. Note: this operation requires a region of at least 1024K. The following command will apply the fixes to the source module $KRM:KERMIT.BASE.S using the update file $KRM:IKMKER.UPD and save the updated source in $KRM:KERMIT.S. 0 GUPI $KRM:KERMIT.BASE.S $KRM:IKMKER.UPD $KRM:KERMIT.S 0 5. Assemble the Kermit source and link the object deck together with MATCH and MFINDX to produce $KRM:KERMIT.LMOD. 0 6. Save the following jobstream in the file $KRM:KERMIT This will ex- ecute the KERMIT program with the proper system parameters. 0 /SYS NOPRINT,REGION=256 /FILE LMOD N($KRM:KERMIT.LMOD) SHR /LOAD XMON KERMIT 0 7. Kermit-MUSIC requries the LSCAN privilege since it does a save library scan directly. You must modify either the system module LOOKUP or the macro invoked by LOOKUP called $MCM:USERTBL.M. Add the line 0 FILNAM '$KRM:KERMIT',(LSCAN,0) 0 to either of the two files. Reassemble the module LOOKUP and make sure that the new object deck is used when rebuilding the nucleus. If you do not give Kermit this privilege, the program will abend on user codes that do not have LSCAN. 0Since Kermit-MUSIC drives the I/O directly for both "TTY" and "SERIES1" devices, your site's ASCII/EBCDIC translation tables will not affect Kermit-MUSIC in file transfer mode. 0 2.5. What's New 0Below is a list of the MUSIC-specific updates in Version 4.2.0 of Kermit-MUSIC added since the previous major release, Version 4.1, in February 1989. For a list of generic additions, see the Kermit-370 chapter. 0 1. Correction of problem in SERIES1-type transfer I/O with large blocks. 0 2.6. What's Missing 0Work on Kermit-MUSIC will continue. Features that need to be improved or added include: 0 - Add support for IBM 3174 AEA transparent mode. 0 - Allow timeouts so Kermit-MUSIC does not wait forever if a packet does not arrive in a timely fashion. This is not possible under MUSIC at present for I/O through a protocol converter. 0 - Implement file archiving. 1IBM System/370 Kermit Page 47 0------------------------------------------------------------------------------- - Support execution of Music commands from Kermit or the remote Kermit. 0 - Add a SET REPEAT subcommand. 0Anyone interested in working on these or other improvements should first get in touch with the Center for Computing Activities at Columbia University to find out if someone else has already begun a similar project (and, if so, who). 1IBM System/370 Kermit Page 48 0------------------------------------------------------------------------------- Index 0 3174 1, 16 Extended ASCII 15 3708 16 File attributes 2, 16, 29 Alternate lines 23 File disposition 8 Appending 20 File renaming 20 ASCII-to-EBCDIC 15 File truncation 19 Attributes. See File at- Filename collision 20, 43 tributes Flow control 31, 41 Folding 12, 21, 43 Batch jobs 8 Foreign 9, 22 Binary files 1, 12, 21 Front end 1 Blanks Full screen 11, 31 preserving trailing 22 stripping 2, 22, 23 GET 10 trailing 2, 23 GIVE 11 BLKSIZE 2 Greek 3, 25 Block check 16 Handshake 22, 31, 41 Cancelling a file transfer Hebrew 3, 25 13 HELP 43 Character sets 3, 19, 25, 26 Host commands 11, 24 CICS 18, 20 CMS 18, 20 IBM 1, 39 Code pages 3 Incomplete files 12, 23 See also Character sets Initialization files 2, 7, Collision. See Filename col- 8, 20, 25, 27, 41, 46 lision Command echoing 25, 31 Kanji 3, 20, 25 Command prefix 9, 11, 24 Katakana 3, 25 Completion codes 35 See also Error codes Languages 3 Controller 16 Line delimiter 44 CRLF 2, 21 Local 9 CSW 18 LOCAL-ECHO 31 CWD 42 Long packets 12, 27, 30 Cyrillic 3, 20, 25 LRECL 2, 22 0 Debugging 17 Mail 8 Default Code 40, 42, 44 See also Electronic DIRECTORY 42 mail Discarding files 20, 23, 37 Margins 23 See also DELETE MTS 2 DOS-4 2 MUSIC 18, 20 Dumping storage 17 MUSIC/SP 39 0 EBCDIC-to-ASCII 15 Optimum packet size 13, 24 ECHO 10 Overwriting files 21 See also Command echo- See also Filename col- ing lision Eighth-bit prefix 26, 28 Electronic mail 8 Packet size 13, 27 End of file 19 Parity 28, 31 Error codes 35, 41 Prefix. See Command, 1IBM System/370 Kermit Page 49 0------------------------------------------------------------------------------- Eighth-bit, Foreign XECHO 10 Printing files 8 Prompt 23 0 Quote. See Prefix 0 Raw transmission 10, 31 RECEIVE 10, 12, 43 RECFM 2 Records 2 Remote 9 RENAME 20 Renaming files 20 See also File renaming ROSCOE 18, 20 0 Screen refresh 32 SEND 10, 12, 44 SEND delay 19 Series/1 1, 16, 39 SERVER 13 SET 14, 44 SHOW 29 SNA 1, 16 SPACE 45 STATUS 30 STOP 30 Stripping blanks. See Blanks Subcommand prefix. See Command prefix Submitting jobs 8 See also Batch jobs 0 Tabs 24 TAKE 31 TDUMP 31 TEST 25 TGET 18 Timeout 24, 29, 32 TPUT 18 Tracing execution 18 Trailing blanks. See Blanks Transaction log 12, 31 Translation 1, 3, 26, 46 Translation tables 3, 11, 25 Transparent mode 10, 31 Truncation 12, 21, 43 See also File trun- cation TSO 18, 20 TTY 1, 16, 31, 39, 41 Type 12, 14 0 Warning 20 Wildcards 40, 44 +